Datasheet

Hardware specifications SPSGRF
6/24 DocID027664 Rev 6
3.4 Module RF compliance limits
The RF compliance limits are those tested for FCC, IC and CE certification using the
dedicated dongle (PC92A.V01). These limits are enforced by the dongle firmware. Care
must be taken with custom application firmware to ensure these limits are not exceeded,
voiding the FCC, IC and CE certification.
Table 4. SPSGRF-915 module
Symbol Parameter Test conditions Typ. Unit
I
DD
Supply current
Operating mode
Tx, +11.6 dBm, 2-FSK, 915 MHz
22 mA
Operating mode
Tx, - 7 dBm, 2-FSK, 915 MHz
9mA
Operating mode Rx, 915 MHz 10 mA
Command mode 0.6 mA
Shutdown high level -V
DD
(with other I/O in high impedance)
0.1 μA
Table 5. RF compliance limits table
Modulation Standards Parameter Max. Unit
2-FSK
GFSK
MSK
FCC Part 15.207
(1)
FCC Part 15.247
(1)
IC RSS-210
EN 300 220-2 V2.4.1
(2)
EN 301 489-01 V1.9.2
(2)
EN 301 489-03 V1.4.1
(2)
1. FCC and IC standards are applicable only to the SPSGRF-915 module.
2. EN standards are applicable only to the SPSGRF-868 module.
Data rate 500 kbps
Output power +11.6 dBm
OOK
ASK
FCC Part 15.207
(1)
FCC Part 15.247
(1)
IC RSS-210
EN 300 220-2 V2.4.1
(2)
EN 301 489-01 V1.9.2
(2)
EN 301 489-03 V1.4.1
(2)
Data rate 250 kbps
Output power +6 dBm