Datasheet

7 CE certification
The SPBTLE-1S module has been certified according to the following certification rules :
• EN 300 328 V 2.1.1 (2016-11) (a)
• ETSI EN 301 489-17 V3.1.1 (2017-02) (b)
• ETSI EN 301 489-1 V2.1.1 (2017-02) (c)
• EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 (d)
• EN 62479:2010
a) EN 300 328 V 2.1.1 (2016 11): “electromagnetic compatibility and radio spectrum Matters (ERM);
Wideband transmission systems; data transmission equipment operating in the 2.4 GHZ ISM band and
using wideband modulation techniques; harmonized EN covering essential requirements under article 3.2 of
the R&TTE directive”.
b) EN 301 489-17 V 3.1.1 (2017 02): “electromagnetic compatibility and radio spectrum Matters (ERM);
electromagnetic compatibility (EMC) standard for radio equipment and services; part 17: specific condition
for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
c) ETSI EN 301 489-1 V2.1.1 (2017 02): “electromagnetic compatibility and radio spectrum Matters (ERM);
electromagnetic compatibility (EMC) standard for radio equipment and services; part 1: Common technical
requirements”.
d) EN60950-1:2006 +A11:2009+A1:2010+A12:2011+A2:2013: “Information technology equipment - safety”.
The module is provided by CE marking:
Figure 10. CE marking
The module has obtained the RED certificate: No. 0051-RED-0010 REV. 0
The certified module production firmware release is:
2.X
For additional information please refer to:
STMicroelectronics Via C. Olivetti , 2 Agrate Brianza 20864 (ITALY)
SPBTLE-1S
CE certification
DS12065 - Rev 5
page 16/25