Datasheet

ManualsBrandsST ManualsDiscrete SemiconductorsPower Transistor, DPAK, PNP, -100V

This is information on a product in full production.

June 2012 Doc ID 13576 Rev 4 1/13

MJD32CT4-A

Low voltage PNP power transistor

Datasheet − production data

Features

■ This device is qualified for automotive

application

■ Surface-mounting TO-252 power package in

tape and reel

■ Complementary to the NPN type MJD31C

Application

■ General purpose linear and switching

equipment

Description

The device is manufactured in planar technology

with “base island” layout. The resulting transistor

shows exceptional high gain performance

coupled with very low saturation voltage.

Figure 1. Internal schematic diagram

DPAK

TO-252

TAB

Table 1. Device summary

Order code Marking Package Packaging

MJD32CT4-A MJD32C DPAK Tape and reel

www.st.com

Summary of content (13 pages)

PAGE 1
MJD32CT4-A Low voltage PNP power transistor Datasheet − production data Features ■ This device is qualified for automotive application TAB ■ Surface-mounting TO-252 power package in tape and reel ■ Complementary to the NPN type MJD31C 3 1 Application ■ DPAK TO-252 General purpose linear and switching equipment Description Figure 1. Internal schematic diagram The device is manufactured in planar technology with “base island” layout.
PAGE 2
Electrical ratings 1 MJD32CT4-A Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Unit VCBO Collector-base voltage (IE = 0) -100 V VCEO Collector-emitter voltage (IB = 0) -100 V VEBO Emitter-base voltage (IC = 0) -5 V Collector current -3 A Collector peak current -5 A Base current -1 A PTOT Total dissipation at Tc = 25 °C 15 W TSTG Storage temperature -65 to 150 °C 150 °C Value Unit Thermal resistance junction-case max 8.
PAGE 3
MJD32CT4-A 2 Electrical characteristics Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICES Collector cut-off current (VBE = 0) VCE = - 100 V - -20 µA ICEO Collector cut-off current (IB = 0) VCB = - 60 V - -50 µA IEBO Emitter cut-off current (IC = 0) VEB = - 5 V - -0.
PAGE 4
Electrical characteristics 4/13 MJD32CT4-A Figure 4. DC current gain (VCE = - 2 V) Figure 5. DC current gain (VCE = - 4 V) Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage Figure 8. Base-emitter on voltage Figure 9.
PAGE 5
MJD32CT4-A Electrical characteristics Figure 10. Resistive load switching time (off) 2.2 Test circuits Figure 11. Resistive load switching test circuit 1. Fast electronic switch 2.
PAGE 6
Electrical characteristics MJD32CT4-A Figure 12. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3.
PAGE 7
MJD32CT4-A 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
PAGE 8
Package mechanical data Table 5. MJD32CT4-A DPAK (TO-252) mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 1.50 L1 2.80 L2 0.80 L4 0.60 1 R V2 8/13 Max. 0.
PAGE 9
MJD32CT4-A Package mechanical data Figure 13.
PAGE 10
Package mechanical data Table 6. MJD32CT4-A DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 Figure 14. DPAK footprint(a) 6.7 1.8 3 1.6 2.3 6.7 2.3 1.6 a.
PAGE 11
MJD32CT4-A Package mechanical data Figure 15. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 16. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min.
PAGE 12
Revision history 4 MJD32CT4-A Revision history Table 7. 12/13 Document revision history Date Revision Changes 01-Jun-2007 1 Initial release. 09-Nov-2009 2 Updated package mechanical data. 14-Jan-2010 3 Modified Table 3 on page 2.
PAGE 13
MJD32CT4-A Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale.