Datasheet

Maximum rating M93C46, M93C56, M93C66, M93C76, M93C86
18/34 Doc ID 4997 Rev 12
10 Maximum rating
Stressing the device above the rating listed in the absolute maximum ratings table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 8. Absolute maximum ratings
Symbol Parameter Min. Max. Unit
T
B
Ambient operating temperature –40 130 °C
T
STG
Storage temperature –65 150 °C
T
LEAD
Lead temperature during soldering
PDIP 260
(1)
1. T
LEAD
max must not be applied for more than 10 s.
other packages See note
(2)
2. Compliant with JEDEC Std J-STD-020 (for small body, Sn-Pb or Pb assembly), the ST ECOPACK
®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
°C
V
OUT
Output range (Q = V
OH
or Hi-Z) –0.50 V
CC
+0.5 V
V
IN
Input range –0.50 V
CC
+1 V
V
CC
Supply voltage –0.50 6.5 V
V
ESD
Electrostatic discharge voltage (human body model)
(3)
3. Positive and negative pulses applied on pin pairs, according to the AEC-Q100-002 (compliant with JEDEC
Std JESD22-A114, C1 = 100pF, R1 = 1500Ω, R2 = 500Ω).
4000 V