Datasheet

4 Maximum ratings
Stressing the device above the rating listed in the absolute maximum ratings table may cause permanent damage
to the device. These are stress ratings only and operation of the device at these or any other conditions above
those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Table 10. Absolute maximum ratings
Sym
Parameter
Condition
(1)
Value
(2)
Unit
T
STG
Storage temperature (V
CC
off, oscillator
off)
–55 to 125 °C
V
CC
Supply voltage –0.3 to 5.0 V
T
SLD
(3)
Lead solder temperature for 10 seconds 260 °C
V
IO
Input or output voltages –0.2 to Vcc+0.3 V
I
O
Output current 20 mA
P
D
Power dissipation 1 W
V
ESD(HBM)
Electro-static discharge voltage
(human body model)
T
A
= 25 °C
>1500 V
V
ESD(RCDM)
Electro-static discharge voltage
(robotic charged device model)
T
A
= 25 °C
>1000 V
1. Test conforms to JEDEC standard.
2. Data based on characterization results, not tested in production.
3. Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.
M41T62, M41T64, M41T65
Maximum ratings
DS3840 - Rev 24
page 22/42