Datasheet

M24C64-DF, M24C64-W, M24C64-R, M24C64-F Initial delivery state
Doc ID 16891 Rev 21 23/43
5 Initial delivery state
The device is delivered with all bits in the memory array set to 1 (each byte contains FFh).
6 Maximum rating
Stressing the device outside the ratings listed in Ta bl e 6 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Refer also to the STMicroelectronics SURE Program and other relevant
quality documents.
Table 6. Absolute maximum ratings
Symbol Parameter Min. Max. Unit
Ambient operating temperature with power applied –40 130 °C
T
STG
Storage temperature –65 150 °C
T
LEAD
Lead temperature during soldering see note
(1)
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
°C
V
IO
Input or output range –0.50 6.5 V
V
CC
Supply voltage –0.50 6.5 V
I
OL
DC output current (SDA = 0) - 5 mA
V
ESD
Electrostatic discharge voltage (human body model)
(2)
2. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114, C1=100pF, R1=1500 , R2=500 )
–3000 3000 V