Datasheet

Revision history M24C32-W M24C32-R M24C32-F
36/38 Doc ID 4578 Rev 17
18-Dec-2007 12
Added Section 2.6.2: Power-up conditions, updated Section 2.6.3:
Device reset, and Section 2.6.4: Power-down conditions in Section 2.6:
Supply voltage (V
CC
).
Updated Figure 4: Maximum R
P
value versus bus parasitic capacitance
(C) for an I
2
C bus.
Replace M24128 and M24C64 by M24128-BFMB6 and M24C64-FMB6,
respectively, in Section 4.9: ECC (error correction code) and write
cycling.
Added temperature grade 6 in Table 9: Operating conditions (M24xxx-
F).
Updated test conditions for I
LO
and V
LO
in Table 12: DC characteristics
(M24xxx-W, device grade 6), Table 13: DC characteristics (M24xxx-W,
device grade 3), and Table 14: DC characteristics (M24xxx-R - device
grade 6).
Test condition updated for I
LO
, and V
IH
and V
IL
differentiate for 1.8 V 
V
CC
< 2.5 V and 2.5 V  V
CC
< 5.5 V in Table 15: DC characteristics
(M24xxx-F).
Updated Table 16: AC characteristics, and Table 17: AC characteristics
(M24xxx-F).
Updated Figure 12: AC waveforms.
Added M24128-BF in Table 25: Available M24C32 products (package,
voltage range, temperature grade).
Process B removed fromTable 21: Ordering information scheme.
30-May-2008 13
Small text changes.
C Process option and Blank Plating technology option removed from
Table 21: Ordering information scheme.
15-Jul-2008 14
WLCSP package added (see Figure 3: WLCSP connections (top view,
marking side, with balls on the underside) and Section 8: Package
mechanical data). Section 4.9: ECC (error correction code) and write
cycling updated.
16-Sep-2008 15
I
OL
added to Table 6: Absolute maximum ratings.
Table 24: Available M24C32 products (package, voltage range,
temperature grade) and Table 25: Available M24C32 products (package,
voltage range, temperature grade) updated.
Table 23. Document revision history (continued)
Date Revision Changes