Datasheet

M24C32-W M24C32-R M24C32-F Revision history
Doc ID 4578 Rev 17 35/38
29-Jun-2006 7
Document converted to new ST template.
M24C32 and M24C64 products (4.5 to 5.5V supply voltage) removed.
M24C64 and M24C32 products (1.7 to 5.5V supply voltage) added.
Section 2.3: Chip Enable (E0, E1, E2) and Section 2.4: Write Control
(WC) modified, Section 2.6: Supply voltage (V
CC
) added and replaces
Power On Reset: VCC Lock-Out Write Protect section.
T
A
added, Note 1 updated and T
LEAD
specified for PDIP packages in
Table 6: Absolute maximum ratings.
I
CC0
added, I
CC
voltage conditions changed and I
CC1
specified over the
whole voltage range in Table 12: DC characteristics (M24xxx-W, device
grade 6).
I
CC0
added, I
CC
frequency conditions changed and I
CC1
specified over
the whole voltage range in Table 14: DC characteristics (M24xxx-R -
device grade 6).
t
W
modified in Table 16: AC characteristics.
SO8N package specifications updated (see Figure 14 and Table 1 8).
Device grade 5 added, B and P Process letters added to Ta bl e 2 1:
Ordering information scheme. Small text changes.
03-Jul-2006 8
I
CC1
modified in Table 12: DC characteristics (M24xxx-W, device grade
6).
Note 1 added to Table 15: DC characteristics (M24xxx-F) and table title
modified.
17-Oct-2006 9
UFDFPN8 package specifications updated (see Ta b l e 2 0 ). M24128-BW-
and M24128-BR part numbers added.
Generic part number corrected in Features on page 1.
I
CC0
corrected in Tabl e 1 3 and Ta bl e 1 2 .
Packages are ECOPACK® compliant.
27-Apr-2007 10
Available packages and temperature ranges by product specified in
Tabl e 2 2, Ta bl e 2 4 and Ta bl e 2 5.
Notes modified below Table 11: Input parameters.
V
IH
max modified in DC characteristics tables (see Ta bl e 1 2, Ta bl e 1 3,
Tabl e 1 4 and Ta bl e 1 5).
C process code added to Table 21: Ordering information scheme.
For M24xxx-R (1.8 V to 5.5 V range) products assembled from July 2007
on, t
W
will be 5 ms (see Table 16: AC characteristics.
27-Nov-2007 11
Small text changes. Section 2.5: V
SS
ground and Section 4.9: ECC
(error correction code) and write cycling added.
V
IL
and V
IH
modified in Table 14: DC characteristics (M24xxx-R - device
grade 6).
JEDEC standard reference updated below Table 6: Absolute maximum
ratings.
Package mechanical data inch values calculated from mm and rounded
to 4 decimal digits (see Section 8: Package mechanical data).
Table 23. Document revision history (continued)
Date Revision Changes