Datasheet

ManualsBrandsST ManualsAmplifiers & ComparatorsOperational Amplifier, 1.1MHz, 20nA, SO-8

November 2017

DocID2163 Rev 15

1/25

This is information on a product in full production.

www.st.com

LM158, LM258, LM358,

LM158A, LM258A, LM358A

Low-power dual operational amplifiers

Datasheet - production data

Features

 Frequency compensation implemented

internally

 Large DC voltage gain: 100 dB

 Wide bandwidth (unity gain): 1.1 MHz

(temperature compensated)

 Very low supply current per channel

essentially independent of supply voltage

 Low input bias current: 20 nA (temperature

compensated)

 Low input offset voltage: 2 mV

 Low input offset current: 2 nA

 Input common-mode voltage range includes

negative rails

 Differential input voltage range equal to the

power supply voltage

 Large output voltage swing

0 V to (V

- 1.5 V)

Summary of content (25 pages)

PAGE 1
LM158, LM258, LM358, LM158A, LM258A, LM358A Low-power dual operational amplifiers Datasheet - production data Related products   See LM158W for enhanced ESD ratings See LM2904 and LM2904W for automotive grade versions Description These circuits consist of two independent, highgain, internally frequency-compensated op amps, specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage.
PAGE 2
Contents LM158, LM258, LM358, LM158A, LM258A, LM358A Contents 1 Schematic diagram.......................................................................... 3 2 Package pin connections................................................................ 4 3 4 Absolute maximum ratings............................................................. 5 Electrical characteristics ................................................................ 7 5 Electrical characteristic curves ................................
PAGE 3
LM158, LM258, LM358, LM158A, LM258A, LM358A 1 Schematic diagram Schematic diagram Figure 1: Schematic diagram (1/2 LM158) V CC 6µA 4µA 100µA Q5 Q6 CC Inverting input Q2 Q3 Q1 Q7 Q4 R SC Q11 Non-inverting input Output Q13 Q10 Q8 Q12 Q9 50µA GND DocID2163 Rev 15 3/25
PAGE 4
Package pin connections 2 LM158, LM258, LM358, LM158A, LM258A, LM358A Package pin connections Figure 2: Pin connections (top view) 1.
PAGE 5
LM158, LM258, LM358, LM158A, LM258A, LM358A 3 Absolute maximum ratings Absolute maximum ratings Table 1: Absolute maximum ratings Symbol VCC Parameter LM158,A LM258,A Supply voltage ±16 or 32 Vi Input voltage -0.
PAGE 6
Absolute maximum ratings LM158, LM258, LM358, LM158A, LM258A, LM358A Table 2: Operating conditions Symbol VCC Parameter Value Supply voltage 3 to 30 Common mode input voltage range Tamb = 25°C Vicm Toper Unit (1) (VCC-) to (VCC+ - 1.
PAGE 7
LM158, LM258, LM358, LM158A, LM258A, LM358A 4 Electrical characteristics Electrical characteristics Table 3: Electrical characteristics for VCC+ = 5 V, VCC- = Ground, Vo = 1.4 V, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Min. Typ.
PAGE 8
Electrical characteristics Symbol VOH LM158, LM258, LM358, LM158A, LM258A, LM358A Parameter High level output voltage Min. Typ. VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C 26 27 VCC+ = 30 V, RL = 2 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax 26 VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tamb = 25 °C 27 Max. Unit 28 V VCC+ = 30 V, RL = 10 kΩ connected to VCC-, Tmin ≤ Tamb ≤ Tmax 27 VCC+ = 5 V, RL = 2 kΩ connected to VCC-, Tamb = 25 °C 3.
PAGE 9
LM158, LM258, LM358, LM158A, LM258A, LM358A 5 Electrical characteristic curves Electrical characteristic curves Figure 3: Open-loop frequency response Figure 4: Large signal frequency response 20 140 100 kΩ 0.1 µF 120 VCC - 100 VO VI VCC/2 + 80 VCC = 30 V & -55°C Tamb +125°C 60 40 20 OUTPUT SWING (Vpp) VOLTAGE GAIN (dB) 10 MΩ 1 kΩ - VO 2 kΩ 10 5 VCC = +10 to +15 V & -55°C Tamb +125°C 0 1.
PAGE 10
Electrical characteristic curves LM158, LM258, LM358, LM158A, LM258A, LM358A Figure 8: Output voltage vs sink current nA Figure 7: Input current Figure 9: Output voltage vs source current 10/25 DocID2163 Rev 15 Figure 10: Current limiting
PAGE 11
LM158, LM258, LM358, LM158A, LM258A, LM358A Electrical characteristic curves Figure 11: Input voltage range Figure 12: Open-loop gain VOLTAGE GAIN (dB) 160 RL = 20 k Ω 120 RL = 2 kΩ 80 40 0 10 20 30 40 POSITIVE SUPPLY VOLTAGE (V) Figure 13: Supply current Figure 14: Input current Figure 15: Gain bandwidth product Figure 16: Power supply rejection ratio DocID2163 Rev 15 11/25
PAGE 12
Electrical characteristic curves LM158, LM258, LM358, LM158A, LM258A, LM358A Figure 17: Common-mode rejection ratio Figure 18: Phase margin vs. capacitive load Phase margin at Vcc = 15 V andVicm = 7.5 V vs.
PAGE 13
LM158, LM258, LM358, LM158A, LM258A, LM358A 6 Typical applications Typical applications Single supply voltage VCC = 5 VDC.
PAGE 14
Typical applications LM158, LM258, LM358, LM158A, LM258A, LM358A Figure 23: High input Z, DC differential amplifier Figure 24: High input Z adjustable gain DC instrumentation amplifier Figure 25: Using symmetrical amplifiers to reduce input current Figure 26: Low drift peak detector µ µ µ Ω Ω Ω 14/25 DocID2163 Rev 15 Ω
PAGE 15
LM158, LM258, LM358, LM158A, LM258A, LM358A Typical applications Figure 27: Active band-pass filter DocID2163 Rev 15 15/25
PAGE 16
Package information 7 LM158, LM258, LM358, LM158A, LM258A, LM358A Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.
PAGE 17
LM158, LM258, LM358, LM158A, LM258A, LM358A 7.1 Package information SO8 package information Figure 28: SO8 package outline Table 4: SO8 mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.75 0.069 A1 0.10 A2 1.25 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 0.25 L 0.40 L1 ccc 0.004 0.050 0.50 0.010 1.27 0.016 1.
PAGE 18
Package information 7.2 LM158, LM258, LM358, LM158A, LM258A, LM358A MiniSO8 package information Figure 29: MiniSO8 package outline Table 5: MiniSO8 mechanical data Dimensions Ref. Millimeters Min. Typ. A Max. Min. Typ. 1.1 A1 0 A2 0.75 b 0.22 0.85 Max. 0.043 0.15 0 0.95 0.030 0.40 0.009 0.006 0.033 0.037 0.016 c 0.08 0.23 0.003 D 2.80 3.00 3.20 0.11 0.118 0.126 E 4.65 4.90 5.15 0.183 0.193 0.203 E1 2.80 3.00 3.10 0.11 0.118 0.122 e L 0.65 0.40 0.60 0.
PAGE 19
LM158, LM258, LM358, LM158A, LM258A, LM358A 7.3 Package information DFN8 2x2 package information Figure 30: DFN8 2x2 package outline Table 6: DFN8 2x2 mechanical data Dimensions Ref. A Millimeters Inches Min. Typ. Max. Min. Typ. Max. 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 A3 0.002 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.90 1.
PAGE 20
Package information LM158, LM258, LM358, LM158A, LM258A, LM358A Figure 31: DFN8 2x2 recommended footprint 20/25 DocID2163 Rev 15
PAGE 21
LM158, LM258, LM358, LM158A, LM258A, LM358A 7.4 Package information TSSOP8 package information Figure 32: TSSOP8 package outline Table 7: TSSOP8 mechanical data Dimensions Ref. Millimeters Min. Typ. A Inches Max. Min. Typ. 1.2 A1 0.05 A2 0.80 b Max. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 1.00 0.65 k 0° L 0.
PAGE 22
Ordering information 8 LM158, LM258, LM358, LM158A, LM258A, LM358A Ordering information Table 8: Order codes Order code LM158QT Temperature range Package Packaging Marking DFN8 2x2 K4A SO8 158 SO8 258A SO8, automotive grade 258AY SO8 258 TSSOP8 258A LM258AST MiniSO8 K408 LM258QT DFN8 2x2 LM358DT SO8 358 SO8, automotive grade 358Y SO8 358A TSSOP8 358 358A LM358ST LM358AST MiniSO8 K405 K404 LM358QT DFN8 2x2 K4E -55 °C to 125 °C LM158DT LM258ADT LM258AYDT (1) LM258DT
PAGE 23
LM158, LM258, LM358, LM158A, LM258A, LM358A 9 Revision history Revision history Table 9: Document revision history Date Revision 01-Jul- 2003 1 First release. 02-Jan-2005 2 Rthja and Tj parameters added in AMR Table 1: "Absolute maximum ratings". 01-Jul-2005 3 ESD protection inserted in Table 1: "Absolute maximum ratings". 05-Oct-2006 4 Added Figure 17: Phase margin vs. capacitive load. 30-Nov-2006 5 Added missing ordering information.
PAGE 24
Revision history LM158, LM258, LM358, LM158A, LM258A, LM358A Date 20-Jun-2014 Revision 12 Changes Removed DIP8 package Corrected typos (W replaced with Ω, £ replaced with ≤) Updated Features Added Related products Table 3: replaced DVio with ΔVio/ΔT and DIio with ΔIio/ΔT. Updated Table 7 for exposed pad dimensions Table 8: "Order codes": removed order codes LM258YPT and LM258AYPT; removed all order codes for devices with tube packing; added package code (NB) to DFN8 2x2 package.
PAGE 25
LM158, LM258, LM358, LM158A, LM258A, LM358A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.