Datasheet

LIS2DH Register mapping
Doc ID 022516 Rev 1 31/49
Registers marked as Reserved or not listed in the table above must not be changed. The
writing to those registers may cause permanent damages to the device.
The content of the registers that are loaded at boot should not be changed. They contain the
factory calibration values. Their content is automatically restored when the device is
powered-up.
Boot procedure is complete about 5 milliseconds just after powered up the device.
INT2_CFG rw 34 011 0100 00000000
INT2_SOURCE r 35 011 0101 00000000
INT2_THS rw 36 011 0110 00000000
INT2_DURATION rw 37 011 0111 00000000
CLICK_CFG rw 38 011 1000 00000000
CLICK_SRC r 39 011 1001 00000000
CLICK_THS rw 3A 011 1010 00000000
TIME_LIMIT rw 3B 011 1011 00000000
TIME_LATENCY rw 3C 011 1100 00000000
TIME_WINDOW rw 3D 011 1101 00000000
Act_THS rw 3E 011 1110 00000000
Act_DUR rw 3F 011 1111 00000000
Table 19. Register address map (continued)
Name Type
Register address
Default Comment
Hex Binary