Datasheet

34/53 DocID025056 Rev 6

8.5 TEMP_CFG_REG (1Fh)

8.6 CTRL_REG1 (20h)

Table 27. TEMP_CFG_REG register

TEMP_EN1 TEMP_EN0 0 0 0 0 0 0

Table 28. TEMP_CFG_REG description

TEMP_EN[1:0]

Temperature sensor (T) enable. Default value: 00

(00: T disabled; 11: T enabled)

Table 29. CTRL_REG1 register

ODR3 ODR2 ODR1 ODR0 LPen Zen Yen Xen

Table 30. CTRL_REG1 description

ODR[3:0]

Data rate selection. Default value: 0000

(0000: power-down mode; others: refer to Table 31)

LPen

Low-power mode enable. Default value: 0

(0: high-resolution / normal mode, 1: low-power mode)

(Refer to section 3.2.1: High-resolution, normal mode, low-power mode)

Zen

Z-axis enable. Default value: 1

(0: Z-axis disabled; 1: Z-axis enabled)

Yen

Y-axis enable. Default value: 1

(0: Y-axis disabled; 1: Y-axis enabled)

Xen

X-axis enable. Default value: 1

(0: X-axis disabled; 1: X-axis enabled)