Certificate

C E R T I F I C A T E O F C O M P L I A N C E
Certificate Number
20140304-E175157
Report Reference
E175157-19980113
Issue Date
2014-March-04
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 2
Issued to:
MULTI-CONTACT ESSEN GMBH
DIVISION TEST&MEASUREMENT,WESTENDSTRASSE
10,45143 ESSEN GERMANY
This is to certify that
representative samples of
COMPONENT - MEASURING, TESTING AND SIGNAL-
GENERATION EQUIPMENT
See Addendum Page
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 61010B-1, Electrical Measuring and Test Equipment;
Part 1: General Requirements
CSA-C22.2 No. 61010-031, Safety Requirements for
Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 031: Safety Requirements for Hand-
Held Probe Assemblies for Electrical Measurement and
Test
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Recognized Component Marks for the U.S. and Canada should be
considered as being covered by UL's Recognition and Follow-Up Service and meeting the appropriate U.S. and
Canadian requirements.
The UL Recognized Component Mark for the U.S. generally consists of the manufacturer’s identification and
catalog number, model number or other product designation as specified under “Marking” for the particular
Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that
have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may
be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when
specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions. The
UL Recognized Component Mark for Canada consists of the UL Recognized Mark for Canada: and the
manufacturer’s identification and catalog number, model number or other product designation as specified under
“Marking” for the particular Recognition as published in the appropriate UL Directory.
Recognized components are incomplete in certain constructional features or restricted in performance
capabilities and are intended for use as components of complete equipment submitted for investigation rather