Specifcations

Undermount Sinks
Dimensional Diagram
IMPORTANT: Dimensions are nominal and may vary within the range of tolerance per by NSI Standard
A112.19.2. These measurements are subject to change. No responsibility is assumed for use of superseded or voided
pages.
Due to such nominal variations with all ceramic products, vanity countertops to be used with ceramic sinks should
only be cut with the actual sink intended for installation, to physically ensure that cut-out dimensions are
appropriate and not to scale, and are not suitable for use as a cut-out template. No responsibility is assumed for the
use or mis-use of these pages for installation purposes.