STRC Mud Truck Lift Kit Instructions

Next grab one of the chassis plate and line up the top center 4 holes to the rails, and it
should line up one end to the front shock tower hole. Use a 3x12 flat head screw and install
chassis plate and upper shock mount block in the following order: Chassis, upper shock
mount block, and stock shock tower. Use a 3x10 button head screw to secure the other side
of the shock mount block. Please note the rectangular side of the shock mount block faces
out, the triangular side should fit towards the original chassis rail.
Now we work on the rear shock tower. You will remove the tower and move it to the
option set of holes on the chassis rails that is more forward.