User Manual
Table Of Contents
- 1 Description
- 2 RoHS compliance
- 3 Application
- 4 Block diagram
- 5 Pin settings
- 6 Electrical characteristics
- 7 Mechanical dimensions
- 8 Soldering
- 9 Product approvals
- 10 Ordering information scheme
- 11 Revision history
D
RAFT
Product approvals SPZB32Wxy1.z
16/19 Doc ID xxxxx Rev 1
9.1.1 FCC labeling requirements
When integrating the SPZB32W1A1.1 / SPZB32W1C1.1 into the final product, il must be
ensured that the FCC labelling requirements, as specified below, are satisfied.
Based on the Public Notice from FCC, the product into which our transmitter module is
installed must display a label referring to the enclosed module.
The label should use wording such as “Contains Transmitter module FCC ID: S9NZB32C1
or “Contains FCC ID: S9NZB32C1” , any similar wording that expressed the same meaning
may be used.
An example is:
Contains FCC ID: S9NZB32C1
9.2 European certification
SPZB32W1A1.1 and SPZB32W1C2.1 devices are CE certified:
Expert opinion N. xxx-xxxxxx released by IMQ refers to the following normative:
Radio: EN300 328: V1.7.1:2006-10
EMC: EN301 489 17 V2.1.1:2009
Safety: EN60950-1:2006 + A11:2009
0051