User's Manual

System setup guide
STEVAL-STLKT01V1
34/37
DocID029208 Rev 2
2.3.3.2 Important additional hardware information
For either STM32 Nucleo board: before connecting the X-NUCLEO-IKS01A1 board to the
X-NUCLEO-IDB04A1 or X-NUCLEO-IDB05A1 expansion board through the Arduino UNO
R3 extension connector, remove these 0-ohm resistors:
 SB25
 SB26
 SB27
Figure 29: Resistors to remove from X-NUCLEO-IKS01A1 board