User's Manual

Regulatory compliance
SPWF04SA, SPWF04SC
Labeling instructions
When integrating the SPWF04SA and SPWF04SC into the final product, it must be ensured
that the FCC and IC labeling requirements specified below are satisfied. Based on the
Public Notice from FCC, the product into which the ST transmitter module is installed must
display a label referring to the enclosed module. The label should use wording like the
following:
Contains Transmitter Module
- FCC ID: S9NSPWFS04
- IC: 8976C-SPWFS04
Any similar wording that expresses the same meaning may also be used.
CE
This module complies with the following European EMI/EMC and safety directives and
standards:
– ETSI EN 300 328 V1.8.1:2012
– EN 301 489-1 V1.9.2:2011 + EN 301 489-17 V2.2.1:2009
– EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
– EN 62479:2010
Figure 3. CE certified
SRRC
(T.B.C.)
The SPWF04Sx module complies with Chinese SRRC certification.
– SRRC CMIIT ID: (T.B.D.)
(See the A.1 at the bottom of this document for the French translation)
12/18 DocID025635 Rev 7