User's Manual
January
2016 DocID0xxxxx Rev 0.17
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change
without notice. www.st.com
• Master slave switch supported during connection and post connection
• Dedicated inquiry access code for improved inquiry scan performance
• Dynamic packet selection channel quality driven data rate to optimize link performance
• Dynamic power control
• Bluetooth radio natively supports 802.11b co-existence AFH
• RFCOMM, SDP, and L2CAP supported
4.2 Supported Profile
• Serial Port Profile (SPP)
• Human Interface Device (HID)
• iPhone Accessory Profile 2 (iAP2)
4.3 AT Command set: DATA PACKAGE
The complete command list is reported in the AT Command DATA PACKAGE user manual
.
5 Hardware specifications
General conditions (V
IN
= 3.3 V and 25
°C).
5.1 Recommended operating conditions
Table 1: Recommended operating conditions
Rating
Min.
Typical
Max.
Unit
Operating temperature range
-40
-
+ 85
°C
Supply voltage
V
IN
2.1
3.3
3.6
V
Signal pin voltage
-
1.8
-
V
RF frequency
2402
-
2480
MHz
5.2 Absolute maximum ratings
Table 2: Absolute maximum ratings
Rating
Min.
Typical
Max.
Unit
Storage temperature range
-40
-
+ 85
°C
Supply voltage,
V
IN
-0.3
-
+
5.5
V
I/O pin voltage,
V
IO
-0.3
+1.8
+ 1.84
V
RF max. input power GFSK
-
-
10
dBm
RF max. input power DQPSK
-
-
6
dBm
RF max. input power DPSK
-
-
-3
dBm