User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
51
`
WARNING
The state of battery charge is not guaranteed for inactivity periods longer than 1
month of storage at temperatures up to +45 ° C.
It is generally recommended to perform a cycle of discharge/charging the battery
after periods of inactivity.
5.3 CLEANING THE DEVICE
It is necessary to keep the equipment clean in order to avoid dust deposits, which
could interfere with the efficiency of all the system components.
It is possible to clean the equipment external surface with a cloth lightly
moistened with warm water and soap. Wipe the washed parts with a dry cloth.
WARNING
Do not immerse the equipment nor its parts in liquids, do not oil any part of it and
avoid cleaning the external surface with alcoholic disinfectants that could cause
damages and discoloration of the printed surfaces.
ATTENTION
Before cleaning any part of the equipment disconnect the equipment from the
power supply and disconnect the device from any other equipment or external
devices.
ATTENTION
Make sure no liquid seeps into the instrument and check it’s complete dryness
before to reconnect to the patient or before connecting it with other devices, thus
switching it on.
WARNING
Use Isopropyl Alcohol or equivalent products in order to disinfect the
BodyGuardian Control Unit, without immersing them into the liquids. Use products
according to directives and regulations of the country in which the device is used.
WARNING
All disposable (band-aid) must be destroyed after using them and cannot be used
again in any way. Please refer to the directives and regulations concerning
disposable requirements of the country in which the device is used.