User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
48
Asymptomatic Events recording: while wearing the Bodyguardian Control Unit
some asymptomatic events can be recorded. Asymptomatic events occurs when
the values of physiological parameters detected violates the medical protocol
specified by the configured thresholds. In case of asymptomatic event detection
the Bodyguardian Control Unit will send a notification of the event to the
Associated Device. If the Associated Device is not available, the Bodyguardian
Control Unit shall retry according to the implementation and configuration
requirement and eventually store in the internal memory the undelivered
notifications.
4.3 INSTALLATION AND INSTRUCTIONS FOR THE PATIENT
The Bodyguardian Control Unit does not require specific installation procedure,
except for the configuration section which must be executed by the external
Associated Device.
WARNING
In order to configure the Bodyguardian Control Unit and to know the software
details please refer to the indications contained in the User Manual provided by the
System Builder.
In order to turn ON the Bodyguardian Control Unit push the button area in the
middle of the device (Figure 4.4). The LED 2 and LED 3 will flash when it is
turned on. After the Bodyguardian Control Unit completes its initialization, the
middle led will flash green.
According to the configuration established, the Bodyguardian Control Unit will
start the data acquisition and transmission.
During the monitoring, if you want to mark a symptomatic event, press the push
button in the middle of the Bodyguardian Control Unit.
Figure 4-3 Bodyguardian Control Unit Push Button