User's Manual

BODYGUARDIAN CONTROL UNIT – BASE KIT Operator Manual
15
`
1.5 OTHER GRAPHIC SYMBOLS
The following table shows description and localization of all symbols placed on
the equipment panels and/or on any other instruments or external devices to which
the equipment may be used in cojunction to or present in the same environment.
SYMBOL
DESCRIPTION
POSITION
Input
Symbol placed on the signal input or
mains voltage input connectors of
the equipment.
Output
Symbol placed on the signal output
or the mains voltage output
connectors of the equipment.
Rx Only
Prescription Only
Symbol placed on the identification
label of the medical device indicating
that Federal (USA) law restricts this
product to sale by or on the order of
a physician.
IPX4
Degree of protection
against ingress of water
(spashing)
Symbol placed on the identification
label of the medical device indicating
that the device is protected against
the splahing of water.
Functional Mode and
Communications status
Symbol placed close the central led
of device to indicate the functioning
and communication status of the
device
Radio Frequency emitting
device (non-ionizing
electromagnetic radiation)
Symbol placed on the identification
label of the medical device to
indicate that the device emittes
Radio-Frequency for its normal
functioning.
Lot number
Symbol placed on the identification
label of the medical device together
with the device lot number.
Battery charge status
Symbol placed close the led of
device to indicate the battery charge
status and re-charge condition.
REF
Reference number
Symbol placed on the identification
label of the medical device together
with the device reference number.
SN
Serial number
Symbol placed on the identification
label of the medical device together
with the device serial number.