User's Manual

Content of the starter kit
STEVAL-BCNKT01V1
2/8
DocID030519 Rev 1
1 Content of the starter kit
Figure 1: STEVAL-BCNCS01V1 - BlueCoin Core System
STEVAL-BCNCS01V1 - BlueCoin Core System board features
 Very compact module for motion, audio and environmental sensing and Bluetooth low
energy connectivity with a complete set of firmware examples
 Main components:
 STM32F446 – 32-bit high-performance MCU (ARM
®
Cortex
®
-M4 with FPU)
 4x MP34DT04-C1 – 64dB SNR Digital MEMS microphone
 LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope
 LSM303AGR – ultra-compact high-performance eCompass module: ultra-low
power 3D accelerometer and 3D magnetometer
 LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output
barometer
 BlueNRG-MS – Bluetooth low energy network processor
 BALF-NRG-01D3 – 50 Ω balun with integrated harmonic filter
 STBC03JR – linear battery charger with 150 mA LDO 3.0 V
 External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, USB OTG, ADC,
GPIOs, SDIO, CAN, I2S
 SWD interface for debugging and programming capability
 The Bluetooth radio power output is set by default to 0 dBm; the FCC and IC
certifications refer to this operating value. The power output can be changed up to 8
dBm by reprogramming the device firmware, but this change will require an update of
the FCC and IC certifications, with additional radio emission tests to be performed.