NEC USB 2.0 PCI Host Adapter User Manual Ver. 4.00 All brand names and trademarks are properties of their Respective owners.
Features and Benefits z Compliant with USB specification revision 2.0 z Hot-swapping feature allows you to connect/disconnect devices without first turning system off z Supports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.
Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI slot. 4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.
For Windows® Server 2003/Vista Windows® Server 2003/Vista has built-in driver support for this controller. Just install the board and Windows will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Windows Installation 1. Right click My Computer, then click Manage. Click Device Manager. 2. Double click Universal Serial Bus controllers option.
