Technical Specifications

Version:
USA
Last update:
4/2/2019
TECHNICAL SPECIFICATIONS
Bevel
No bevel UFH
See IM
Lock
No locking system
Installation
Gluedown
Layer
Thickness (mm) Thickness (mil)
Top Layer
0.15 6 Quartz enhanced UV cured coating
Core
2.85 112
Total
3.0
118
CERTIFICATIONS & CHEMICAL PROPERTIES
Norm
Item Test method
Requirement Result
EN 14041
Emissions EN 717-1
≤ 0.124 mg/m3 E1
Decret No2011-321
Emissions ISO 16000
TVOC<1000µg/m3 VOC A+
GreenGuard Gold
Emissions Spectrometry, chromatography
TVOC≤220µg
GreenGuard Gold Certified
Prop 65
Orthophthalates Spectrometry
ND Compliant
CPSIA
Lead CPSC-CH-E-1002-08
≤ 90ppm
Compliant
EU REACH Regulation
PAHs Spectrometry, chromatography
<1mg/kg Compliant
SVHC
Spectrometry, chromatography
≤ 0.1% (w/w) Compliant
EN 14041 CE Certification Multiple Multiple Compliant
PHYSICAL PROPERTIES
Norm
Item Test Method
Requirement Result
ASTM F1700
Length tolerance
ASTM F2055 +/- 0.4 mm per 305mm Pass
Width tolerance
ASTM F2055 +/- 0.4 mm per 305mm Pass
Thickness tolerance
ASTM F386 +/- 0.13mm Pass
Squareness ISO 24337 0.25mm Pass
Residual Indentation ASTM F1914
≤8% (140lbs/63.5kg)
Pass
Flexibility ASTM F137
No cracks or breaks Pass
Dimensional Stability ASTM F2199
∆W/∆L ≤ 0.16%
Pass
Resistance to Chemicals ASTM F925
Slight change only Pass
Resistance to Heat ASTM F1515
△E ≤8 Pass
Resistance to light ASTM F1514 △E ≤8 Pass
ISO 16511 Flatness ISO 24337
Length: ≤ 0.50% (concave) ≤ 1.0% (convex)
Width: ≤ 0.10%(concave) ≤ 0.15% (convex)
Pass
Opening ISO 24337
O
ave
≤0.15
Pass
Height difference ISO 24337
H
ave
≤0.10
Pass
Wear Resistance EN 13329
≥600R
Pass
Impact Resistance EN 13329 ≥1400mm Pass
Micro Scratch EN 16094
≤ MSR-A3, ≤ MSR-B3
Pass
Castor chair EN 425 Only slight change Pass
Furniture leg EN 424 No visible change Pass
Residual Indentation ISO 24343-1
≤ 0.15mm
Pass
Resistance to staining EN 438-2
Group 1 and 2: grade 5,
group3: grade 4
Pass
Locking strength ISO 24334
Long side≥1.0 kN/m, Short side≥ 1.5 kN/m
NA
Dimensional Stability
ISO 23999 ≤0.25% Pass
NALFA LF 01-2011 Resistance to Chemicals NALFA LF 01-2011 Slight change only Pass
Impact Resistance NALFA LF 01-2011 3.5 ≥ 1400mm Pass
Impact Resistance NALFA LF 01-2011 3.6 ≥ 500mm Pass
EN 14041 Thermal Resistance (R) EN 12667/ASTM C518 NA Suitable for underfloor heating systems
Slipperiness EN 13893
≥ 0.3
Pass
Reaction To fire EN 13051-1 NA Class Bfl -S1
Static Electrical Propensity((voluntary))
EN 1815
≤ 2.0kV
NA
Others
Density
ISO 23996 NA Around 2000 kg/m3
Resistance to light
ISO 105-B02:1994, ≥ Grade 6 Pass
Slipperiness
ANSI A137-1
≥ 0.42
Pass
Slipperiness DIN 51130
NA R9
Rolling Load ASTM F2753 NA NA
Fire Resistance (CHF) ASTM E648/NFPA 253 ≥0.45 Class 1
LEED SCORECARD
LEED Programme
Certifcation
Category Credit Title LEED Points Attainable Credit Description
How our product contributes
to obtaining LEED points
Indoor Environmental
Quality
Credit 1: Enhanced Indoor Air Quality
Strategies – Option 2 Additional
Enhanced IAQ Strategie - option D
1 point ID&C,
2 points Retail CI
To reduce concentrations of chemical that
can damage air quality, human health,
productivity, and the environment.
1. Formaldehyde emission are less than
0.05mg/m3, TVOCs are less than 0.5mg/m3.
2. The product is GreenGuard Gold certified.
Credit 2: Low-Emitting Materials –
Option1 Flooring
1 point
1. VOC emission are less than 0.5mg/m3.
2. The products is GreenGuard Gold certified.
Credit 4: Indoor Air Quality
Assessment - Option 2 Air Testing
2 points
To establish better quality indoor air in the
building
1. Formaldehyde emission are less than
0.05mg/m3, TVOCs are less than 0.5mg/m3.
2. The product is GreenGuard Gold certified.
Specification Sheet LVT
Type
Waterproof thermoplastic composite
LEED was developed to address all buildings everywhere, regardless of where they are in their life cycle. From hospitals to data centers, from historical buildings to those still in the design phase, there is a LEED
certification programm for every building. Our products will contribute value to a building's LEED v4 Scorecard in the following LEED certiifcation programm categories recognized by the USGBC as per following
Page 1 of 4