AGIL LCU 2 Series (LCU 2EU/US/AS/AU/CN) Remote Lamp Controller 1
AGIL LCU 2 LoRaWAN Series Precautions Please read this specification carefully before use, so as to avoid any installation error that might cause the malfunction of the device.
AGIL LCU 2 LoRaWAN Series Dimension Features LORA transmission, support LORAWAN; Standard NEMA 7-PIN interface, plug and play; Remotely turn ON/OFF, built-in 16A relay; Photocell auto control; Support dimming interface: DALI and 0-10V, and PWM (customizable)； Remotely read electrical parameters: current, voltage, power,power factor and consumed energy; Support recording total energy consumed and resetting; Optional sensor: GPS, tilt detection; Lamp failure detection: LED lamp; Automati
AGIL LCU 2 LoRaWAN Series Parameters Basic Info Model AGIL LCU2 Series Relay 1-route, 250V/16A Voltage Range 96V-264VAC Frequency Range 50-60Hz Current Range 0-2A Static Power <2W Voltage Range Same as Input AC Frequency Range 50-60Hz Output Current Range 0-2A Max Load ≦400W AC Input Data Reading Voltage Detection 96V-264VAC Current Detection 0-2A Data Accuracy ≤3% Active Power Calc Yes Power Factor Calc Yes Energy Record Yes Dimming Info Mode PWM Analog Volt
AGIL LCU 2 LoRaWAN Series Output 5V/400Hz (adjustable) Note Preset 100%, PWM=1 or0 DALI 1.
AGIL LCU 2 LoRaWAN Series Overview Wiring Diagram Wiring Diagram Standard: C136.
AGIL LCU 2 LoRaWAN Series These three models of our company’s FCC certified products: AGIL LCU 2AS, AGIL LCU 2AU and AGIL LCU 2US, make the following statement: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
