Owner's Manual

6
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material
or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against
defects in material or workmanship. All SSV Works Speakers are covered by a limited 1 year
warranty against defects in material or workmanship. All Kicker Speakers are covered by a
limited 1 year warranty against defects in material or workmanship. Labor for replacement of
defective components is not covered. Contact SSV Works for further warranty information.
INSTALLATION NOTES
PARTS LIST IMAGES
The use of a thread locker is recommended on all screws to prevent loosening due to vibration. If the vehicle has SSV Works front kick
panels (RZ4-F65/RZ3-F65) installed, the passenger side kick panel will need to be removed prior to installation of the RZ4-GB10.
3. Glove Box Door Bracket 4. Lower Mounting Bracket2. 8mm Socket Head Screws &
Washers x16
5. Flat Mounting Bracket “A” 6. Mounting Bracket “B”
1. RZ4-GB10K Enclosure
(door not included)
7. Left & Right Door Hinge
Brackets
8. #14 Screws x1
TOOLS NEEDED FOR INSTALLATION
- 10mm & 8mm Socket
- Ratchet & Extension
- T-40 Torx Driver
- #3 Phillips Screwdriver
- #2 Phillips Screwdriver
- Panel removal tool
L
R
RZR Turbo S & RZR XP1000 2014+
Glove Box Subwoofer Enclosure