Owner's Manual

2
RZR XP1000 & 2015+ RZR900
Amp Tray and Wiring Installation
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in
material or workmanship. All SSV Works Electronics are covered by a limited 1 year warranty
against defects in material or workmanship. All Kicker Speakers are covered by a limited 1
year warranty against defects in material or workmanship. All Kicker Ampliers are covered by
a limited 2 year warranty against defects in material or workmanship. Labor for replacement
of defective components is not covered. Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- T30 & T40 Torx Socket
- 10mm and 5.5mm Socket
& Rachet or Wrench
- 4mm & 5mm Allen Wrench
- #2 & #3 Phillips Screwdriver
PARTS LIST IMAGES
3. M6 x 1.0 Screws x 1
6. Battery Terminal Cable
4. M6 Washer x 1
7. Zip Ties x 5
1. Amp Power Wire
2. Direct-t Amp Plate with
pre-tuned Amp with Ride
Command harness
5. Fuse Holder with 40A Fuse
- Drill with 1/8”, 1/4” & 1/2”
Drill bits
- Panel removal tool
- Wire Crimpers
- Wire Strippers
- Scribe or Marker
- Utility Knife