Data Sheet

c) Standard switch dimensions shown; when fitted with M12 connector, the overall length of the switch is 63.6mm.
d) Refer to mounting information on page 4.
e) When correctly sealed.
f) Do NOT over-tighten as this can permanently damage the switch.
NOTES
OUTLINE DRAWING
All dimensions shown in mm. Tolerances = ±1mm.
HOUSING SPECIFICATIONS
ELECTRICAL INTERFACE OPTIONS
Flying Leads
M12 Connector
Wire Designation
Red Vs
Green Output
Blue 0V
G2x0 Series
c
G6x0 Series
G7x0 Series
c
G8x0 Series
Housing Series
G2x0 G6x0
Thread
d
M12x1
with hex nut
1/2”-20 UNF
with O-ring
Pressure
e
100 bar / 1450 psi maximum
Tightening Torque
f
3 Nm / 26.5 in-lbs maximum
Housing Series
G7x0 G8x0
Thread
d
1/4” NPT 1/2” NPT
Pressure
e
100 bar / 1450 psi
maximum
600 bar / 8702 psi
maximum
Tightening Torque
f
3 Nm / 26.5 in-lbs maximum
Pin Designation
1 Vs
2 Not connected
3 0V
4 Output