Data Sheet

c) Hex nut and washer supplied with Type 1, Type 2 and Type 3.
d) When correctly sealed.
NOTES
OUTLINE DRAWING
All dimensions shown in mm. Tolerances = ±1mm.
HOUSING SPECIFICATIONS
NOTE: The dimensions of the Type 5 part make it a “push in”
part. The sensor can also be secured using an M10 nut.
ELECTRICAL INTERFACE
Wire Designation
Red Vs
Green Output
Blue 0V
Type 1
Type 3
Housing Series - External Mounting
Type 1 Type 2
Thread M12x1x8g
M12x1x8g
with
hex nut
c
Pressure
d
7 bar / 101 psi maximum
Tightening
Torque
1.5 Nm / 13.26 in-lbs maximum
Housing Series - Internal Mounting
Type 3 Type 5
Thread
M12x1x8g
with
hex nut
c
M10x1
Pressure
d
7 bar / 101 psi maximum
Tightening
Torque
1.5 Nm /
13.26 in-lbs maximum
Not Applicable
Type 5
Type 2