Licensing and installation instructions

SSL
By the way: if you have previously purchased
plug-ins by Solid State Logic:
A customer account on the SSL internet page
has not been a requirement since 2021; of
course, all items you have previously purchased
are also securely stored in your iLok account.
Installation
Now start the installation programme and follow
the required steps.
Before launching your plug-in for the first time,
please open the iLok Licence Manager, log in
using your iLok ID and click on the symbol next
to the search field top right
This is where you enter the activation code from
our e-mail. Then please select the place your
licence should be saved to. With SSL, you can
do this on your computer or on the iLok USB
flash drive (https://www.thomann.de/de/pace_
ilok_3.htm).
You can now launch your recording programme,
and your new software will be available to you.
You’ll find more detailed information on activa-
tion via iLok here:
https://support.solidstatelogic.com/hc/en-
gb/sections/4408131843217-Licensing-
Authorisation-and-iLok
You can contact the manufacturer’s support
through this link:
https://www.solidstatelogic.com/support-page/
downloads
Should you encounter any problems with the va-
lidity of an activation code purchased from us,
please contact our customer service:
By telephone:
[phone]
By e-mail:
[e-mail]
Step 04 Further helpful links:
6