Manualshelf

SSD00041 SSD Yeti 2 Speed Install Guide

ManualsBrandsSSD RC ManualsAxialYeti 2-Speed Transmission Conversion Kit
123456
11
In order to complete the conversion the SSD aluminum servo mounts need to
be installed on the chassis and a servo installed. The shift link will need to be
attached to the transmission shift rod using the hardware provided. The other
end needs to be attached to the shift servo (using a servo saver).
Note: A 3 channel radio is needed in order to connect the shift servo and
change gears.
SSD-RC.com 6 Yeti 2 Speed Conversion