SSD Manual Locking Hub - Manual

Note: you may need C clip pliers for this step.
3 Install the C clip carefully onto the groove on the shaft
ATTENTION: Do not open the C clip too wide
4 Assemble the steel locker and hub locker screw together
SSD-RC.com 3 Manual Locking Hubs
5 Grease the end of the axle shaft and place the spring on it
6 Grease the inside and outside of the steel locker.
Assemble the locker and steel hub case on the shaft
SSD-RC.com 4 Manual Locking Hubs