SSD00179 SSD HD D60 Centered Rear Axle Manual

SSD HD D60 Centered Rear Axle Assembly Instructions

Note: The stock AR60 axle will need to be disassembled with all gears,

bearings and shafts removed before starting.

1 Install 13mm pinion shaft bearings

2 Install gears with the stock bearings

Be careful not to over tighten the screws

SSD-RC.com 1 HD D60 Centered Rear Axle

PAGE 1
SSD HD D60 Centered Rear Axle Assembly Instructions Note: The stock AR60 axle will need to be disassembled with all gears, bearings and shafts removed before starting. 1 Install 13mm pinion shaft bearings 2 Install gears with the stock bearings Be careful not to over tighten the screws SSD-RC.
PAGE 2
3 Install diff cover 4 Install shafts and stock bearings SSD-RC.
PAGE 3
5 Install upper link mount 6 Install link mounts SSD-RC.
PAGE 4
After axle assembly is complete it can be installed on the chassis in the same way as the stock axle. Spare/Upgrade Parts SSD00040 SSD00081 SSD00065 SSD00092 SSD00095 SSD-RC.