Owners manual

8 Solutions Guide Revision 5
716-759-8666 • [e-mail]
TORQUE SPECIFICATIONS
BEFORE DRIVING YOUR
VEHICLE, YOU SHOULD
CHECK THE TORQUE ON ALL
NUTS AND BOLTS IN THE KIT,
INCLUDING ANY SLIDER
BOLTS ON THE CALIPERS.
RE-TORQUE CALIPER BOLTS
AFTER 500 MILES. ALL
SPECIFICATIONS ARE IN
FT-LBS.
SAE 2
SAE 7
SAE 8
SAE 5
5.8 9.8 10.98.8
Low
Carbon
(soft)
Medium
Carbon Alloy
Medium
Carbon
Heat Treat
Medium
Carbon
Alloy
U.S.
Steel
Type
Metric
BOLT GRADES
1/4” 20 43861081291411
1/4” 28 6 4 10 7 12 9 14 10 16 13
5/16” 18 9 7 17 13 21 16 25 18 29 23
5/16” 24 12 9 19 14 24 18 29 20 33 26
3/8” 16 16 12 30 23 40 30 45 35 49 39
3/8” 24 22 16 35 25 45 35 50 40 54 44
7/16” 14 24 17 50 35 60 45 70 55 76 61
7/16” 20 34 26 55 40 70 50 80 60 85 68
1/2” 13 38 31 75 55 95 70 110 80 113 90
1/2” 20 52 42 90 65 100 80 120 90 126 100
9/16” 12 52 42 110 80 135 100 150 110 163 130
9/16” 18 71 57 120 90 150 110 170 130 181 144
5/8” 11 98 78 150 110 140 140 220 170 230 184
5/8” 18 115 93 180 130 210 160 240 180 255 204
3/4” 10 157 121 260 200 320 240 380 280 400 320
3/4” 16 180 133 300 220 360 280 420 320 440 350
7/8” 9 210 160 430 320 520 400 600 460 640 510
7/8” 14 230 177 470 360 580 440 660 500 700 560
1” 8 320 240 640 480 800 600 900 680 980 780
1” 12 350 265 710 530 860 666 990 740 1060 845
Bolt Thread Dry Oiled Dry Oiled Dry Oiled Dry Oiled Dry Oiled
Dia. per inch
SAE Bolt 22557788SocketSocket
Grade Head Head
Cap Cap
Screw Screw
5mm 3.5 5 6 8
6mm 6 9 10.5 12
8mm 15 22 25 32
10mm 29 44 51 62
12mm 51 76 89 111
Bolt Dia. Oiled Oiled Oiled Oiled
METRIC 5.8 8.8 9.8 10.9
Per SAE J1701 and SAE J1701M specifications.