Programming Instructions

LD2342 V1.3 Page 12 of 21
SRT Marine
User guide
SRT-MTB
©
proAIS Application
Diagnostics tab
The diagnostics tab shows key status information from the AIS transponder. This information can be used to quickly verify that
the transponder has been installed correctly and is operational.
AIS Transponder Status
•
A tick next to the items in this area indicates correct operation.
•
If a red cross is shown then some action may be required:
o
Transponder MMSI valid has a red cross - check the MMSI of the unit is configured by selecting the 'Static
Data' tab and verifying that a valid MMSI has been entered. If the MMSI is 000000000 then it has not been
programmed.
o
GPS position fix has a red cross - the GPS has not acquired a position fix. Please allow up to 5 minutes for a
fix to be acquired. If the red cross is still present check the GPS antenna is correctly connected and has a
clear view of the sky.
o
AIS has transmitted a position report has a red cross - the unit has not yet transmitted its position. Please
allow up to 5 minutes after GPS fix has been acquired for the green tick to appear. If the red cross is still
present after this time please refer to the active alarms section below. The AIS will not transmit unless it has
acquired GPS fix and has a valid MMSI programmed