Wire-free Battery Camera Kit Quick Using Guide Customer Service Skype ID: tech.sricam Website: www.sricam.com E-Mail: support@sricam.com Copyright: Sri033-V1.
1. Product Description Camera 1 POWER 1. Power Port 4.9V-5.3V, used for battery charging 3 RESET ON/OFF 2 2. Power Switch 3. Reset (pairing) button: Long press for 5 seconds to enter the pairing mode. Base Station Box 1. Power Port 4.9V-5.3V, used for base station power supply 2. Network Port 3. SD card Port: support 4-128G memory card 4.
2. Installing and charging the camera batteries 1. Insert two 18650 rechargeable batteries into the battery compartment (not included). Follow the steps shown below (you need to use a battery of the same brand and capacity, old and new batteries cannot be mixed) 2. Plug the power adapter into an indoor electrical outlet, the charging time is about 5-8 hours.
3. Device Connection Step 1: SriHome App Installation Method 1: Search for “SriHome” on Google Play or iOS App Store. Method 2: Scan the QR code to download “SriHome” App.
Step 5: Add the device to the APP Open the “SriHome APP”, tap the “+”, follow the instructions to add the device.
4. Basic Function Introduction 1. Camera Feed Icon (1) １ Camera Channel: Select the camera you want to view (2) １ (3) Light Brightness adjustment １ (4) Black and white night vision video when 2 Spotlight does not turn on 3 (5) (6) 7 Device Light Mode: Three Light modes to choose. Light on mode 4 1 2 5 6 4 3 Light Alarm Mode: the spotlight automatically SD turns on when the camera detects motion 8 at night, video recording is in color.
2. Settings Introduction (1) Time Settings: The time can be set according to the Time zone of the area. Settings (2) Camera Settings: Used for camera connection and association. (up to 4 cameras can be connected at the same time) (3) Alarm Settings: ① Notifications: It is opened to receive push alarm messages. Home Settings Time Settings Camera Settings ② Alarm Notification Settings: You can set the content of the alarm Alarm Settings sent by different cameras.
5. How To Add New Camera ( This base station supports up to 4 cameras ) 1. Press and hold the “RESET” button for 5 seconds until pairing mode. POWER ON/OFF RESET 2.
6. How to extend the battery life of the camera 1. Set the Frequency. Extend the detection frequency, the higher the detection frequency value, the longer the range of the PIR alarm function, the longer the battery life. 2. Set up a regular PIR program. PIR program setting can effectively reduce the number of camera activations, extending battery life. 3. Turn off the prompt sound.
R Shenzhen Sricctv Technology Co.,Ltd Add: The building 40, 5th Industrial Park of Huaide Cuigang, Fuyong Street, Bao’an, Shenzhen, China More FAQs Please visit: www.sricam.
