Instruction Manual

◆if the product does NOT work properly ,please contact your dealer or the nearest service center. Never attempt
to disassemble the camera yourself.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTION MAY RESULT IN A POTENTIALLY
FATAL ELECTRICAL SHOCK OR PROPERTY DAMAGE
PRE-INSTALLATION
Check and make sure below accessories are included out of the box
Setup Connection Cable
The camcorder normally is installed above 3 meters high place, to avoid setting up on
the ladder, we provide a setup connection cable so that you can set up beside router
before installation.
First, Connect two wires of the setup connection cable with your floodlight camcorder
separately and fix them with the wire nut in the accessory kit. (Black to Brown, white
to blue , Green is Ground, use it when you do the real installation). Plug the cable plug
to your socket you will hear “System is ready” after a while.
Operation Manual
1. Downloading and Installing the App.
Mounting
bracket
Fix screw
Rubber plug
wire nut
Green Screw
Ground
wire
EVA