SP2 CONTINUOUS LIGHT KIT Model: 2816 SP2 Light Kit ASSEMBLY AND USER MANUAL Copyright 2012 DTX International
SP2 CONTINUOUS LIGHT KIT Congratulations on purchasing the best solution for photo studio lighting on a budget. This kit is perfect for beginners and professionals alike for taking those studio quality portraits without the photo studio cost. The Square Perfect 2000 Watt Photography and Digital Video Continuous Lighting Kit comes with a carrying case, 2 light stands, 2 softboxes, 2 light heads, and ten 45 watt 5000k compact fluorescent daylight balanced photo bulbs.
SP2 CONTINUOUS LIGHT KIT PARTS A F B G C I D H J E A B C D E F G H I J Carry Bag (1) Light Body (2) Power Cord (2) Auxiliary Parts Bag (2) High Tension Support Flex Rod (8) Light Stand (2) 45W Light Bulb (10) Main Diffuser Lens (2) Inner Diffuser Lens (2) Softbox Body (2) 3 Copyright 2012 DTX International
SP2 CONTINUOUS LIGHT KIT SETUP 1. First, open the case and remove all of the components. Then remove the components from their boxes and bags. Verify that you have all the parts listed on page 3. 2. Assembling the Softboxes A. Open up one of the softbox bodies (J) and slip the body Figure 1 over the light body (B) so that the silver reflective side is facing the direction of the light sockets (Figure 1). B.
G. Install the inner diffuser lens (I) into the light box using the hook & loop fasteners on the inside the softbox body (Figure 6). H. The final step in completing the softboxes is to install the main diffuser lenses (H) over the softbox body by hooking one corner of the lens over one corner of the body and fitting the entire lens over the soft box, then securing it on all four sides with the attached hook & loop fasteners (Figure 7). 4.
