Instruction Manual

Conduct that may cause injury or physical damage.
CAUTION
The duplication and modification of this instruction manual is prohibited. Please note that our
company is not responsible for any expenditure, monetary losses, or other losses caused by the
use of this product.
Main Product Specifications
Do not place metal objects, or objects that contain metal, between the surface supplying
power and the device being charged.
This may cause harm or damage.
If you wear any medical devices, consult with your doctor before use.
This product may affect the operation of medical electrical equipment.
Do not place near magnetically sensitive objects.
Items such as credit cards, smart chip cards, and debit cards, may break or records may
be wiped due to magnetic properties and heat. If cards are stored in the case, remove them
before product use.
Do not use in the car.
This may affect the operation of equipment, such as anti-theft systems for cars.
Good example Bad example: Easy to break
How to handle the USB
connector
The power source for the USB may not be
turned on.
Check the power connection of the power
supply source, such as securely insert the
USB-AC adapter (sold separately) into the outlet.
Use equipment with a rated output voltage of
5V.
The USB connector may be loose or
unplugged.
Check to see that the USB cable is properly
connected.
The device to be charged may not be
compatible with the "Qi" standard.
Check to see if the device is compatible with
the "Qi" standard.
Use a USB-AC adapter (sold separately) of
5V/2A or more.
Power may not be supplied when using a
USB-AC adapter that exceeds 5V rated output
voltage.
The rated output for the power source of the
USB may be too low.
Issue
Solution
Adjust the position of the device to be charged.
Before resuming power supply, ensure that
the device to be charged has sufficiently
cooled down.
Be mindful that if the device to be charged is
in use while power is being supplied, it will
extend the time it will take to charge.
Remove the device to be charged and place it
back on after 5 seconds; the power supply will
resume.
If the temperature rises while power is being
supplied, it may stop charging due to the
protection function on the charger.
The device to be charged may be in use while
power is being supplied.
Supply power within the operating
temperature range.
It could be out of the usage temperature
range.
Use the included USB cable. A USB cable other than the one included may
be in use.
This product comes with a protective function
that stops power supply to the device when
overcurrents are detected.
The device to be charged could be placed
outside the power supply area.
Remove the foreign matter and place the device to
be charged back on the unit after approximately 5
seconds; the power supply will resume.
Foreign matter such as metal pieces may be
caught between the power supply surface and
the device to be charged.
Remove the case to charge.
Charging may not work or become unstable if
a case with a thickness of more than 4 mm or
a metal case is attached.
If there Appears to be a Malfunction
• Instruction manual (this document)
• Main unit • USB cable (dedicated)
Power
supply
area
Standard
Input
Output
Input Terminal
USB Cable
Main Unit Size
Mass
Qi (Version 1.2.4)
5V/9V *Supports QC 3.0
5W / 7.5W / 10W
USB Type-C
Connector type: USB Type-A / USB Type-C
Cable length: Approximately 120 cm (including connector)
Approximately W 100 x D 100 x H 12 (mm)
Approximately 62 g
* Product specifications are subject to change without notice for improvement.
• The diagram is for explanatory purposes; the actual shape of the product may differ.
How to Use
Accessories
Product Features
• Qi is a registered trademark of Wireless Power Consortium.
• USB Type-C
TM
is a registered trademark of USB Implementers Forum.
• All other product names or otherwise mentioned within the text are registered
trademarks of each respective manufacturer.
The TM mark is not specified within the text.
Backup the memory on the device to be charged before using such device
with this product.
1. Connect Cable
Prepare a USB-AC adaptor (5V/2A or more recommended) separately.
(1) Connect the USB connector (Type-C) of the included USB cable with the input terminal
of the main unit.
(2) Connect the USB connector (Type-A) of the included USB cable with a commercially
available USB-AC adapter.
(3) Connect the USB-AC adapter to a household power outlet.
(4) When the power is turned on, the LED on the main unit will light up, and turn off after
approximately 1 second.
2. Begin Charging
(1) Place device to be charged, such as a smartphone, in the power supply area.
(2) When the device begins to charge, the LED lamp on the main unit will light up.
If the LED lamp does not light up, reposition the device and place it in an area that lights
up the LED lamp.
* This product has a power transmission coil, and each device to be charged has a power
reception coil built-in; power is supplied from electromagnetic induction generated when
the power reception coil comes near the power transmission coil that has received the
electrical current.
* The position in which the power reception coil had been installed in the device to be
charged may differ depending on the type of device. Adjust the position in which the
device to be charged is placed within the power supply area by turning it upside down
and such.
* This does not guarantee that power will be supplied to all devices.
3. Finish Charging
• Check the status of the charge through the display on the device side.
• When disconnecting the USB cable, be sure to hold the connector and pull it straight out.
4. How to View the LED Display
When Abnormalities are Detected
The LED lamp will blink when abnormalities, such as those outlined below, are detected:
• The device to be charged is placed outside the power supply area.
• The device to be charged does not support Qi.
• Foreign matters such as metal pieces are caught in between the main unit and the device
to be charged.
* If the device to be charged has a case attached, depending on the material and thickness
of the case, the device may not charge normally. Remove the case beforehand to charge
normally.
* The LED display that indicates when the device is fully charged differs by the type and
function of each device to be charged.
* Depending on the type of device, or if the battery level on the device to be charged is
depleted, it may take longer to start up or power may not be supplied.
• The device to be charged does not need to be connected with a cable as devices, such
as smartphones that conform to Qi standards, will charge just by placing them on the
product.
• This product comes with a protective function that stops power supply to the device when
overcurrents are detected. Power supply will resume when the charging device is removed
for 5 seconds and placed back on the product.
• Maximum 10W quick charge is possible (QC 3.0 compatible).
• This product comes with a foreign matter detection function that stops power supply
when it detects foreign matter, such as metal.
• The LED indicates the power supply status.
If the device to be charged does not charge or is taking too long to charge, please
refer to the following table. If the matter cannot be resolved, please contact SQUARE
ENIX Customer Support.
https://sqex.to/MDINFO
This product is a certified device of the "Qi" wireless
charging standard.
WPC Qi Certified
WPC (Qi) Certification Number: QI-ID12098
Precautions for Use
• Prepare a USB-AC adapter (5V/2A or more recommended) separately.
• While power is being supplied, this product and the device being charged may become
warm, but this is not abnormal. If the temperature rises while power is being supplied,
it may stop charging due to the protection function on the charger. Wait until the
temperature of the device to be charged has cooled down sufficiently before supplying
power again.
• Charging may not work or become unstable if a case with a thickness of more than 4 mm
or a metal case is attached.
• Noise may occur if used near radios or similar.
• For devices to be charged with a vibration function, the device may fall from the product
due to it vibrating, so turn off the vibration function before use.
• It is not possible to supply power to multiple devices to be charged at the same time.
* This product is meant for general household use. Do not use it for business purposes or
for situations similar to business use.
* This product is not intended to be used for facilities and equipment involved with human
lives, such as medical equipment, nuclear equipment, aerospace equipment, transport
equipment, as well as facilities and equipment that require a high degree of reliability,
so do not use this product for such purposes. The company is not responsible for any
personal injury or social damage caused by using this product.
* The company is not liable for any damages caused by using this product.
USB connector (Type-A)
USB-AC adapter (sold separately)
USB connector (Type-C)
Input terminal
USB cable
Power supply surface
Device to be charged
Power ON (device to be charged is not placed)
Error
Light turns off after turning on for
about 1 second
Light continues to blink
When the device to be charged is removed Light turns off after being on for
about 3 minutes
Supplying power Light remains on
Status of Main Unit LED Display Status
Instruction manual
EN
Please Read First for Safe Use
The precautions outlined here are meant to reduce chance of harm or damage to
you and others. Please be sure to follow these guidelines.
Symbols L Indicates prohibited conduct (what you must not do).
C Indicates caution.
Do not subject this product to
strong impacts, such as dropping
or throwing this product.
This may cause harm or damage.
Do not supply power from a car's
cigarette lighter socket.
This may cause harm or damage.
Keep out of the reach of infants at
all times.
This may cause harm or damage.
When there is thunder, do not touch
this product or compatible devices.
This may cause harm or damage.
If charging is not completed, even
after the specified charge time has
exceeded, stop charging.
This may cause harm or damage.
Do not place anything other than
standard-compliant equipment on
this product.
This may cause harm or damage.
Do not place metal objects, or
objects that contain metal, between
the surface supplying power and
the device being charged.
This may cause harm or damage.
When used by children, guardians
should read the instruction manual
carefully and instruct children on
proper usage.
Be sure to maintain proper usage of
this product, especially while charging.
Remove the USB cable from this
product when the product is not
being used for an extended time.
This may cause harm or damage.
Do not place near magnetically
sensitive objects.
Items such as credit cards, smart
chip cards, and debit cards, may
break or records may be wiped due
to magnetic properties and heat. If
cards are stored in the case, remove
them before product use.
Place on a stable and level surface.
Placing the product on an inclined or
unstable surface may cause it to fall
and cause injury or damage.
If you wear any medical devices,
consult with your doctor before
use.
This product may affect the operation
of medical electrical equipment.
Do not use in humid places, such
as bathrooms and near humidifiers.
This may cause harm or damage.
Do not cover or wrap this product
with a cloth or futon when power is
being supplied.
This may cause harm or damage.
Do not insert metal into the
terminal.
This may cause harm or damage.
Fully and securely insert the USB
cable terminal.
If the USB is not fully inserted, this
may cause harm or damage to the
product.
Do not connect this product using a
USB hub.
This may cause harm or damage.
Do not place heavy objects on the
USB cable or this product.
This may cause harm or damage.
Immediately discontinue use if the
product, cable, or charging device
exhibits abnormalities, such as
smoke, damage, heat,
deformation, unusual odor, or
unusual sounds.
This may cause harm or damage.
Do not use anything other than the
included cable.
This may cause harm or damage.
Conduct that may cause substantial harm or damage.
Do not place this product in cooking
devices (including microwave
ovens and high-pressure
containers).
This may cause harm or damage.
Do not supply power near IH
cookware.
IH cookware share the same frequency
band as the Qi standard. Using this
product to supply power when near IH
cookware may cause the product to
malfunction, overheat, or breakdown.
Do not use in the car.
This may affect the operation of
equipment, such as anti-theft
systems for cars.
Do not place this product near fire
or heat sources.
This may cause substantial harm or
damage.
Do not allow this product to come
into contact with liquids.
This may cause harm or damage.
Do not touch the USB cable with
wet hands.
This may cause harm or damage.
Do not charge devices while they
are in contact with your body, such
as when it is placed in your pocket.
This may generate heat and cause
burns.
Do not supply power by any method
other than specified or use
equipment with a voltage/current
that exceeds the input specifications.
This may cause harm or damage.
Do not disassemble or modify the
product.
This may cause harm or damage.
Do not use in places such as the
following.
This may cause harm or damage.
• Near fire • Near heating devices
• Under an electric blanket
• Places exposed to direct sunlight
• Places where the temperature is 0℃ or lower
and 40 ℃ or higher
• Places where a lot of dust is generated
DANGER
Conduct that may cause death or serious injury.
WARNING
DANGER
CAUTION
WARNING
This symbol on the product, packaging and accompanying document
indicates that this product should not be disposed with normal household
waste.
This product shall be taken to the applicable collection point for recycling.
If you ever need to throw away, please contact the shop where you
purchased the product, or your local authority.
This product complies with the EMC and RoHS requirements of the
European Community.
Instruction manual Serial No. 9YYA18-EN1 (Y2108)
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance between 20cm the radiator your body.