Product Overview

ManualsBrandsSquare D ManualsElectrical Limit SwitchesOsiSense XCR Limit Switch (Snap Action)

Product data sheet

Characteristics

XCRF17

limit switch XCR - metal stay put T rods lever

square rod 6 mm - 2X(1NC+NO)

Product availability : Non-Stock - Not normally stocked in distribution facility

Main

Range of product OsiSense XC

Series name Special format

Product or component type Limit switch

Product specific application For hoisting and mechanical handling applications

Device short name XCR

Sensor design -

Body type Fixed

Head type Rotary head

Material Metal

Fixing mode By the body

Movement of operating head Rotary

Type of operator Metal stay put crossed rods lever (square rod 6 mm)

Type of approach 2 directions lateral approach

Electrical connection Screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm²

Number of poles 4

Contacts type and composition 2 x (1 NC + 1 NO)

Contact operation Snap action

Contact block per direction [control

circuit]

1 per direction

Positive opening With

Complementary

Body material Zinc alloy

Switch actuation By any moving part

Cable entry 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 0.35...0.47 in (9...12 mm) conforming to

NF C 68-300

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 28, 2019

Summary of content (6 pages)

PAGE 1
XCRF17 Product data sheet Characteristics limit switch XCR - metal stay put T rods lever square rod 6 mm - 2X(1NC+NO) Main Range of product OsiSense XC Series name Special format Product or component type Limit switch Product specific application For hoisting and mechanical handling applications Device short name XCR Sensor design - Body type Fixed Head type Rotary head Material Metal Fixing mode By the body Movement of operating head Rotary Type of operator Metal stay put crossed
PAGE 2
Contacts insulation form Zb Number of steps 1 Positive opening minimum torque 6.19 lbf.in (0.7 N.m) Minimum torque for tripping 5.31 lbf.in (0.6 N.m) Minimum actuation speed 0.01 m/min Maximum actuation speed 4.92 ft/s (1.5 m/s) Maximum displacement angle -90 ° 90 ° Contact code designation A300, AC-15 240 V, Ie = 3 A) conforming to EN/IEC 60947-5-1 appendix A Q300, DC-13 250 V, Ie = 0.27 A) conforming to EN/IEC 60947-5-1 appendix A [Ui] rated insulation voltage 300 V conforming to CSA C22.
PAGE 3
Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 1012 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product end of life instructions Need no specific recycling operations California proposition 65 WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1 Diiso
PAGE 4
Product data sheet Dimensions Drawings Dimensions (1) (2) (3) 1 tapped entry for n° 13 cable gland. Rod length: 200 mm. Rod length: 300 mm.
PAGE 5
Product data sheet Connections and Schema XCRF17 Wiring Diagram Two 2-pole NC + NO Snap Action (A) (B) st 1 contact nd 2 contact 5
PAGE 6
Product data sheet Technical Description Functionnal Diagram (P) (A) (B) (1) (2) (3) (4) (5) 6 Positive opening point 1st contact 2nd contact NC contact with positive opening operation Closed Open Tripping Resetting XCRF17