Brochure

51
5 5
Miniature snap switches
OsiSense XC Special
Sealed design
Pre-cabled
Switch type XC010L2 XC011L2
Environment characteristics
Switch actuation On end, at plunger (1) On end, domed plunger (1)
Product certications e, IEC 60947-5-1
Degree of protection IP 66
Operating temperature 0...+ 85°C
Materials Internal housing Metal
Casing Nitrile
Fixing support Steel, zinc passivated
Contact Ag
Mechanical characteristics
Maximum tripping force 5.3 N
Minimum release force 1.5 N
Maximum permissible end of travel force 30 N
Tripping point (TP) (2) 11.4
± 0.4
mm 17.4
± 0.5
mm
Maximum differential travel 0.2 mm
Minimum overtravel 0.2 mm
Inter-contact distance 0.5 mm
Mechanical durability 2 million operating cycles
Electrical characteristics
Operational current 1 A on 24 V (50/60 Hz)
Thermal current/insulation voltage 12 A/60 V
Connection
A05 VVF cable, 3 x 0.75 mm
2
, length 2 metres, external diameter y 7.6 mm
Electrical durability AC-15: 0.5 million operating cycles
(1) Manual actuation must be made by an intermediate insulated part, in order to meet basic safety requirements.
One of the two xing holes must also be used as an earth protection terminal.
(2) Distance between the base of the switch and the top of the plunger at the instant the contact changes state (see dimensions, page 50).
Characteristics