Instructions / Assembly
Table Of Contents
- Square D™ Safety Switch User Manual
- Safety Information
- Installation and Operation Requirements
- Exposure to Moisture, Chemicals, and Condensation
- Installation
- Fusible Safety Switches
- Class R Rejection Clip Kits
- Non-Fusible Safety Switch Short Circuit Current Rating
- Ground Kits
- Insulated Neutral Assemblies
- Line Side Barriers
- Service Entry Requirements
- Maintenance
- Wiring Diagrams
- Replacing the Viewing Window 30–200 A
Class 3130 / 3110 Installation
Table 2 - Anchorage As-Tested
Light Duty Safety Switches
Type 1 – 30 A
1/4 in. grade 5 bolts and flat washer at four locations,
torque to 8 ft–lbs. Dimensions: in. / [mm]
General Duty and Heavy Duty – Single and Double Throw
Type 1 30 AMP 240 V / 600 V Type 60 A 240 V
1/4 in. grade 5 bolts and flat washer at three locations,
torque to 7 ft–lbs. Locations are top center, and two
bottom locations.
Type 3R 30 A 240 V / 600 V Type 60 A 240 V
1/4 in. grade 5 bolts and flat washer at three locations,
torque to 7 ft–lbs.
12 GEX75737