Technical Data Bulletin

© 2020 Schneider Electric
All Rights Reserved
12/2/2020
7-65
www.se.com/us
MicroLogic™ Trip Unit Accessories MicroLogic™ Electronic Trip Units
Class 612, 612 / Refer to Catalogs 0611CT1001 and 0612CT0101
NSX Cord for
Modbus Communications
Breaker Status and
Control Module (BSCM)
SDTAM Module
(Remote indication relay for
motor applications)
ZSI Interface Module
Table 7.133: Electronic Trip Unit Accessories, Wire Harness [15] and ULP Cords for
H-, J-, and L-Frame Circuit Breakers
[16]
Description
Factory-Installed
Cat. No. Suffix
Field-Installable
Kit Cat. No.
NSX Cord [17]
(for Modbus Communication)
L = 1.3 m (4.27 ft)
EA S434201
L = 3 m (9.84 ft)
EB S434202
BSCM (Breaker Status and Control Module) with
NSX Cord [17]
L = 1.3 m (4.27 ft) EG [18]
S434201BS
L = 3 m (9.84 ft) EH [18]
S434202BS
Replacement BSCM
— S434205
BSCM with NSX Cord for V > 480 Vac [17]
L = 1.3 m (4.27 ft) EK [18]
S434204BS
L = 3 m (9.84 ft) EL [18]
S434303BS
SDTAM 24/415 Vac/dc Module [19]
V S429424
SDX Module 24/415 Vac/dc [20]
V S429532
ZSI Wire Harness, H/J Frame
YH3 S434300
ZSI Wire Harness, L-Frame
YH3 S434301
ENCT Wire Harness YH2 S434302
OF Wire Harness YH1 S434500
SD/SDE Wire Harness YH1 S434501
SDx/SDTAM Wire Harness YH1 S434502
MN Wire Harness YH1 S434503
MX Wire Harness YH1 S434504
24 Vdc Terminal Block Wire Harness [21]
YH1 S434505
Motor Operator Wire Harness
YH1 S434506
Communicating Motor Operator Wire Harness
YH1 S434507
NSX Wire Harness [21]
YH1 S434508
BCM ULP Communication
Module
M2C programmable contacts:
circuit breaker internal relay with
two contacts
Table 7.134: Trip Unit Field-Installable Accessories for P- and R-Frame Circuit Breakers
Description
Factory-
Installed
Cat. No.
Suffix
Field-Installable Kit Cat. No.
P-Frame R-Frame
Unit Mount I-Line
Motor
Operated
Drawout
With Rotary
Handle
Unit Mount I-Line
Circuit Breaker Communication Module (BCM ULP)
E1 S64205 S64205 S64207 S64206 S64205 S64205 S64205
Replacement BCM ULP
— 33106 33106 33106 33106 33106 33106 33106
Two Programmable Contacts Module (M2C)[22]
V S64273 S64273 S64273 S64273 S64273 S64273 S64273
External Voltage Sensing (EVS)
YV S64203 S64203 S64210 S64209 S64210 S64208 S64208
Table 7.135: Trip Unit Field-Installable Accessories for MasterPact NT/NW Circuit Breakers
Description
Factory-Installed
Cat. No. Suffix
Field-Installable Kit Cat. No.
MasterPact NT MasterPact NW
Fixed Drawout Fixed Drawout
Circuit Breaker Communication Module (BCM ULP)
— S48188 S47485 S47405 S48384
Replacement BCM ULP
— 33106 33106 33106 33106
Two Programmable Contacts Module (M2C)[22]
— S47403 S47485 S47403 S48382
External Voltage Sensing (EVS)
— S47506 S47507 S47506 S48533
7
MINIATURE AND MOLDED CASE
CIRCUIT BREAKERS
[15] Wire harness is required for I-Line applications, optional for unit-mount applications
YH1 = all installed accessories but ZSI and ENCT
YH2 = ENCT and all installed accessories
YH3 = ZSI and all installed accessories
YH4 = ZSI, ENCT and all installed accessories
[16] For proper selection, see catalog 0611CT1001.
[17] Installation requires IFM (LV434000) for Modbus communication and/or FDM (STRV00121) for external display.
[18] If using with motor operator requires communicating motor operator (suffix NC).
[19] Remote indication relay for motor applications
[20] Remote indication relay
[21] I-Line wire harness is included for communication network accessories.
Optional wire harness for unit mount requires YH1 suffix.
[22] Compatible with MicroLogic P and H only.