Technical Data Bulletin

7-60
© 2020 Schneider Electric
All Rights Reserved
12/2/2020
PowerPact™ Circuit Breaker Accessories
Plug-In and Drawout Mountings
www.se.com/us
Class 611, 612 / Refer to Catalog 0611CT1001, 0612CT0101
Mountings
H- and J-Frame
Plug-In Mounting
H- and J-Frame
Drawout Mounting
Table 7.118: Plug-In and Drawout Mountings for H- and J-Frame Circuit Breakers
(3P or 2P in a 3P module)
Description
Factory
Installed
Cat. No.
Field-
Installable
Cat. No.
Complete Factory-
Assembled Circuit Breakers
Plug-in base shipped with circuit breaker
N —
Drawout cradle shipped with circuit breaker
D —
Special Order Options for
Plug-In and Drawout Circuit
Breakers
Plug-In Base
Circuit breaker Only
HJ00 —
Plug-in base kit
— S29278
Drawout
Cradle
Circuit breaker only
HJ00 —
Plug-in base kit
— S29278
Cradle side plates (fixed part of chassis)
— S29282
Circuit breaker side plates (moving part
of chassis)
— S29283
Accessories for Plug-In and
Drawout
H-Frame Shutter Kit (set of two)
— S37442
J-Frame Shutter Kit (set of two)
— S37443
Secondary
Disconnect
Blocks
Fixed part 9-wire connector (mounted on
base)
— S29273
Moving part 9-wire connector (mounted
on circuit breaker)
— S29274
Support for 2-moving connectors
— S29275
Extended escutcheon with extended toggle handle
— S29284
Two position indicating switches (connected/
disconnected)
— S29287
H-Frame Short Terminal Cover (3P
— S37436
J-Frame Short Terminal Cover (3P)
— S37440
L-Frame
Plug-In Mounting
L-Frame
Drawout Mounting
Table 7.119: Plug-In and Drawout Mountings for L-Frame Circuit Breakers
Description
Poles
Plug-in Mounting Drawout Mounting
Factory-
Installed
Cat. No.
Field-
Installed
Cat. No.
Factory-
Installed
Cat. No.
Field-
Installable
Cat. No.
Kit (stationary and moving parts)
3 N — D —
4 N — D —
Stationary Part
Plug-in base
3 — S32514 — S32514
4 — S32515 — S32515
Fixed part of chassis
— — — S32532
Moving Part
Circuit breaker only
HJ00 — HJ00 —
Moving part of chassis
— — — S32533
Short terminal covers
3 — 2x S32562 — 2x S32562
4 — 2x S32563 — 2x S32563
L-Frame Disconnecting Blocks
L-Frame Locking Device
Table 7.120: Plug-In and Drawout Accessories for L-Frame Circuit Breakers
Description
Field-
Installable
Cat. No.
Secondary Disconnecting Blocks
Fixed Part 9-wire connector S29273
Moving Part
9-wire connector S32523
Support for 3 moving connectors
S32525
Fixed + Moving 9-wire manual auxiliary connector
S29272
Shutters
Two shutters for plug-in base
32521
Chassis Accessories
Extended escutcheon for toggle
S32534
Locking device (key lock is not included)
S29286
Two position indicating switches (connected/disconnected)
29287
Table 7.121: Termination Options
Termination Letter Termination No.
N = Plug-in L G L 3 6 4 0 0 U 3 1 X
For factory-installed termination, place
termination letter in the third block of the
circuit breaker catalog number.
D = Drawout
P-Frame Drawout Cradle Connections
Table 7.122: Drawout Cradle and Accessories for P-Frame Circuit Breakers
Description
Cat. No.
Drawout Cradle
Product
Selector
Cradle
Connectors
Front Connected Flat (FCF) SFCF12 [37]
Rear Connected T Horizontal/Vertical (RCTH/RCTV) SRCTV12 [37]
Cradle
Accessories
Modbus™ cradle communication module S33852
Safety shutters
S48933
Secondary disconnects terminal shield
S33763
Cradle position switch 1a/1b Form C— Connected/test/disconnected
S33170
Low level cradle position switch 1a/1b Form C—Connected/test/disconnected
S33171
Cell keying kit
S33767
Disconnected position key locking—provision for Kirk or Federal Pioneer Lock
S33772
Door interlock kit S33786
Racking interior kit
S33788
Door escutcheon (for replacement only, included with circuit breaker)
S33857
Transparent cover
S33859
Push-in terminal kit (3 wires)
S33098
Push-in terminal kit (6 wires)
S33099
Finger cluster
S33166
Cluster grease (12 oz. tube)
S48899
7
MINIATURE AND MOLDED CASE
CIRCUIT BREAKERS
[37] Needs 2 kits per cradle.