Technical Data Bulletin

7-58
© 2020 Schneider Electric
All Rights Reserved
12/2/2020
PowerPact™ Circuit Breaker Accessories Compression Lugs and Power Distribution
Connectors (PDC)
www.se.com/us
Class 612 / Refer to Catalog 0612CT0101
Power Distribution Connectors
PDC6HD6 PDC6JD4
PDC3HD2 PDC3JD20
Crimp lugs or PDC connectors extension “A” past end of circuit
breaker
“A” See Table
Molded Case
w/Mechanical
Lugs
“A” See Table
Power distribution connectors (PDCs) can be used for multiple load wire connections on
one circuit breaker in place of standard distribution block to save space and time.
The connectors are attached to circuit breaker terminals equipped with separately
provided terminal nut connectors.
[29]
Applications:
•
For use on load end of circuit breaker only
•
For use in UL 508 Industrial Control applications
•
For use in UL 1995/CSA C22.2 No. 236 heating and cooling equipment
•
For copper wire only
Table 7.111: Power Distribution Connectors for B-Frame, H-Frame, J-Frame and L-
Frame Circuit Breakers
[30]
Use with
Circuit
Breaker
Type
Ampere
Rating
(Wires Per Terminal)
Wire Range
Dimension A
(in.)
Cat. No.
Qty.
Per
Kit
Kit Contents
BD, BG,
BJ
125 A
(3) 14 - 2 AWG
1.2 PDC3BD2 3
Mounting
hardware, lugs
125 A
(6) 14 - 6 AWG
1 PDC6BD6 3
HD, HG,
HJ, HL
[31]
15–150 A
(6) 14–6 AWG Cu
1.0 PDC6HD6 3
Mounting
hardware, lugs,
special purpose
label and
instructions
15–150 A
(3) 14–2 AWG Cu
1.2 PDC3HD2 3
JD, JG,
JJ, JL
[31]
150–250
A
(6) 14–4 AWG Cu
1.0 PDC6JD4 3
150–250
A
(2) 14–1 AWG and
(1) 3–2/0 AWG Cu
1.5 PDC3JD20 3
LD, LG,
LJ, LL
[32]
150–600
A
(3) 14–1 AWG and
(2) 3–2/0 AWG
1.28 PDC5DG20L3 3
Mounting
hardware, lugs,
special purpose
label, Medium
Terminal Shield
and instructions
150–600
A
(12) 14–4 AWG
1.31 PDC12DG4L3 3
Mounting
hardware, lugs,
special purpose
label, Long
Terminal Shield
and instructions
PDC12P4 PDC6P20
Table 7.112: Power Distribution Connectors for M-Frame and P-Frame Circuit
Breakers
[30]
Ampere
Rating
(Wires Per
Terminal)
Wire Range
Cat. No.
Qty
Per Kit
Kit Contents
Use for multiple load
connections on one
circuit breaker in place
of standard distribution
block to save space
and time.
• Use on load end of
circuit breaker only
• Use in UL508
Industrial Control
applications only.
• Use in UL1995/CSA
C22.2 No. 236 heating
and cooling
equipment.
• For Cu wire only.
250–
1200 A
(6) 12–2/0 AWG Cu
PDC6P20 3
Mounting hardware, lugs,
special purpose label and
instructions
(6) 12–2/0 AWG Cu
PDC6P204 4
Mounting hardware, lugs,
special purpose label and
instructions
250–
1200 A
(12) 10–4 AWG Cu
PDC12P4 3
Mounting hardware, lugs,
special purpose label and
instructions
PDC12P44 4
Mounting hardware, lugs,
special purpose label and
instructions
7
MINIATURE AND MOLDED CASE
CIRCUIT BREAKERS
[29] Refer to Table xxxxxx: Terminal Shields and Phase Barriers
[30] Not for use with I-Line™ circuit breakers.
[31] Special Purpose—Not for General Use. Use on ON end of the circuit breaker only when ON end is used as Load end. Use on OFF end of the circuit breaker only when OFF end is used as
Load end.
[32] Kit includes long terminal shield and cover, which adds 1.65 inches to standard lug with short terminal shield.