Buying Guide

Feed individual wires
through the knockouts of
the removable end plates.
Make sure the side stating
“out” will face the outside
of the enclosure and slide
the removable plates up
the wires.
Pivot the wire-loaded
end plate and screw
into position.*
Some drywall damage
above or beneath the
enclosure can be covered
up by the Square D
Service Upgrade Load
Center’s longer cover.
Continue to wire the device as you would
with a traditional load center.
*Allfourendplatesmustbescrewedtotheenclosure,regardless
of whether or not they have wires fed through them.