Technical Data Bulletin

1-38
© 2020 Schneider Electric
All Rights Reserved
10/30/2020
Combination Service Entrance Devices Accessories and Hubs for CSEDs
www.se.com/us
Class 4119, 4120
1
LOAD CENTERS
Accessories and Hubs for CSEDs
Table 1.82: Accessories
Description
Cat. No.
Generator Kit: Interlocks main service disconnect and generator circuit breaker (order separately). For :
Homeline
™
CSED Devices RC816F-, RC2040M-, SO2040M- containing suffix -C or -CH
QO CSED Devices QC816F-, QC2442M- containing suffix -C or -CH
RCGK2
QCGK3
Backfed inverter circuit breaker retaining kit for SC2636M200FPV and SC2636M225FPV
PK2SCPV
Fifth Jaw Kit for:
Meter Main Types: C, RC, SC, QC
All-In-One Types: SC, SU (100–225 A), QC, RC, SO
5J
Bypass (Horn Type) for Ringless Type Meter Mains and All-In-Ones (100–200 A)
(except for RC8L125S, RC1624M100S and RC1624M125S–use RCHB).
MMHB
Lexan Meter Socket Cover Plate for:
Ring and Ringless Type Meter Mains
Ring and Ringless Type All-In-Ones
29007
Meter Socket Sealing Rings for Ring Type Meter Mains and All-In Ones:
Snap Type Aluminum (Std.)
Screw Type Aluminum
Snap Type Stainless Steel
2920910001
29008W
ARP00026
Anti-Inversion Kit . For use ONLY on 400 A Meter Mains and All-In-Ones with lever bypass.
MMLRK
Trim Kit for 2 in. X 6 in. stud wall, used with Reverse All-In-Ones, SU3040M200R, and SU3040M225R
SU2X6TRIM
Barrel Lock Kit (Barrel Lock not included), supplied with bracket and mounting screw, refer to listings for where used.
SCBRLLOCK
Semiflush Flange Kit for:
Meter Mains: SC816D150/200C and RC816D200CH
All-In-Ones: SC2040M200C
SC200F
Semiflush Flange Kit for ring- and ringless-type Meter Mains and All-In-Ones (400 A Only)
FK400
Ringless Type Utility Cover for RU3040D400CL/FL, QU12L400CL/FL, and QU816D400CL/FL. Includes one piece meter socket and pull box cover with handles
and closing plate.
R400L
Lug Kit includes (4) lugs, for use with 2 AWG–600 kcmil Al/Cu conductors. Lugs are for standard 2-Hole mounting. Meter Main and All-In-One units supplied with
(2) studs per phase and neutral will accept one lug per phase and neutral. Not for use on 400 A devices with “K” suffix.
CMELK4
Branch Circuit Breaker Field Installation Kit for two Q-Frame Circuit Breakers (QBL, QDL, or QGL, order separately). For CUM400CB, QUM400CL or QUM400CK -
includes (2) mounting pans, (4) wires.
BMK2Q400
Overhead Feed Trough for 400 A ring- and ringless-type Meter Mains and All-In-Ones.
OCK400
Touch-Up Paint (ASA49 Gray)
PK49SP
Ground Bar Kit, Meter Mains and All-In-Ones QC, RC, and SC (100–225 A)
PK15GTA
Filler Plate for:
Meter Main Types: QC, CU All-In-One Types: QC
QOFP
Filler Plate for:
Meter Main Types: RC, SC All-In-One Types: SC, RC, SU
HOMFP
Neutral Lug (6-2/0 AWG) for: Meter Main Types: RC, SC, QC All-In-One Types: SC, SU, QC, RC
LK100AN
Overhead Barrier Tunnel Kit for Ringless & Horn Bypass in RC/QC Devices
OHBS
Overhead Barrier Tunnel Kit for Lever Bypass RC/QC Devices
OHBL
Table 1.83: Hubs and Closing Plates
Hub
Series
Conduit Size
(inches)
Cat. No.
Disc.
Sch.
Closing Plate for “A” Hub opening
ACP DE4
A
1.00 A100 DE4
1.25 A125 DE4
1.50 A150 DE4
2.00 A200 DE4
2.50 A250 DE4
Adapter plate to allow use of “A”
Hubs on “A-L” size hub openings
AAP DE4
Closing Plate for “A-L” Hub opening
ACPL DE4
A-L
2.00
A200L [71]
DE4
2.50 A250L DE4
3.00 A300L DE4
3.50 A350L DE4
4.00 A400L DE4
Closing Plate for “B” Hub opening
BCAP DE1A
B
0.75 B075 DE1A
1.00 B100 DE1A
1.25 B125 DE1A
1.50 B150 DE1A
2.00 B200 DE1A
2.50 B250 DE1A
B300 3.00 B300 DE1A
[71] Supplied with AAP adapter plate and “A” hub.