Instructions / Assembly

73298-753-01
12/01
Lexington, KY, USA
METER–PAK™ Wireway
Ducto para cables METER–PAK™
Class / Clase 4141
1
© 2001 Schneider Electric All Rights Reserved
Retain for future use. / Conservar para uso futuro.
E
N
G
L
I
S
H
Instruction Boletín de
Bulletin instrucciones
INTRODUCTION
Figure 1: METER–PAK Dimensions
Top meter height
Bottom meter height
18 in. (457 mm)
Grade to device bottom
Grade
4141-9620
This bulletin contains instructions for the installation of METER–PAK™
Wireway to METER–PAK devices manufactured by Square D. METER–PAK
Wireway can be used on the METER–PAK devices listed in Table 1. For
dimensions, refer to Figure 1 and Table 1.
Table 1: METER–PAK Devices
Catalog No. Wireway
Grade to
Device Bottom
Meter Height
Bottom Top
MP33-125
MPR33-125
MPH33-125
MP43X11PED 25 in. (635 mm)
36 in. (914 mm)
54 in. (1372 mm)
MP44-125
MPR44-125
MPH44-125
63 in. (1600 mm)
MP55-125
MPR55-125
MPH55-125
MP66-125
MPR66-125
MPH66-125
54 in. (1372 mm)
MP42-200
MPR42-200
MPH42-200
37–1/4 in.
(946 mm)
46–1/4 in.
(1175 mm)
MP43-200
MPR43-200
MPH43-200
55–1/4 in.
(1403 mm)
MP64-200
MPR64-200
MPH64-200
64–1/4 in.
(1632 mm)
MP85-200
MPR85-200
MPH85-200
MP86-200
MPR86-200
MPH86-200
55–1/4 in.
(1403 mm)
MPL32-200 MP35X11PED 16–5/8 in. (422 mm)
50–5/8 in.
(1286 mm)
64–5/8 in.
(1641 mm)
MPL43-200 MP43X11PED 25 in. (635 mm)
38–3/8 in.
(975 mm)
66–3/8 in.
(1686 mm)
MPL64-200 MP35X11PED 16–5/8 in. (422 mm) 30 in. (762 mm) 72 in. (1829 mm)