Brochure

Square-Duct™ Wireways
General Purpose—NEMA Type 1 Painted Wireway
© 1986—2011 Schneider Electric
All Rights Reserved
6
08/2011
™
Construction
General Purpose—NEMA Type 1 Painted Wireway construction consists of:
• 16 gauge galvanized steel covers and bodies in sizes:
— 2.50 in. x 2.50 in. (64 mm x 64 mm)
— 4.00 in. x 4.00 in. (102 mm x 102 mm)
— 6.00 in. x 6.00 in. (152 mm x 152 mm)
• 14 gauge galvanized steel covers and bodies in sizes:
— 8.00 in. x 8.00 in. (203 mm x 203 mm)
— 10.00 in. x 10.00 in. (254 mm x 254 mm)
— 12.00 in. x 12.00 in. (305 mm x 305 mm)
• Available with knockouts or without knockouts in sizes:
— 2.50 in. x 2.50 in. (64 mm x 64 mm)
— 4.00 in. x 4.00 in. (102 mm x 102 mm)
— 6.00 in. x 6.00 in. (152 mm x 152 mm)
• Available without knockouts in sizes:
— 8.00 in. x 8.00 in. (203 mm x 203 mm)
— 10.00 in. x 10.00 in. (254 mm x 254 mm)
— 12.00 in. x 12.00 in. (305 mm x 305 mm)
• Patented hidden hinge permits the screw-cover arrangement to be converted to a hinge-cover system on all sizes except
12.00 in. x 12.00 in. (305 mm x 305 mm), where hold-down screws are on BOTH sides of the wireway
• Open-top assembly protection for wire and cable insulation that could be damaged in a pull-through wiring system
• Knockouts on wireway sides
• Adapters available for connection to other brands of wireway
Finish
General Purpose—NEMA Type 1 Painted Wireway is furnished in ANSI 49 gray polyester powder finish inside and out over
phosphatized surfaces.
Various Components for Type 1 Wireway