Brochure

Square-Duct™ Wireways
Oiltight—NEMA Type 12 Wireway
21
08/2011
© 1986—2011 Schneider Electric
All Rights Reserved
™
t
Reducer Connector Extra Connector Kit
This fitting permits the lay-in feature to be retained
when reducing to a smaller wireway size.
When joining a lay-in section or fitting to a closure
plate, a box connector, a non-lay-in cut-off fitting, or
any similar non-lay-in section or fitting, a 90° angle
sealing plate is required at each junction.
This plate is furnished with fittings as noted
on page 15. Additional 90° angle sealing plates may
be required in some cases. Plate includes a flange
gasket and flange screws, not shown.
This hinged sealing plate permits quick and easy access to
the wireway interior without using a tool.
Patent number 4,398,564
Flange Detail
4.00 in.
(102 mm)
Flange
Flange
2.50 in. x 2.50 in.
(64 mm x 64 mm)
4.00 in. x 4.00 in.
(102 mm x 102 mm)
.38 in.
(10 mm)
.50 in.
(13 mm)
.38 in.
(10 mm)
.38 in.
(10 mm)
.38 in.
(10 mm)
.38 in.
(10 mm)
.38 in.
(10 mm)
.50 in.
(13 mm)
.50 in.
(13 mm)
.50 in.
(13 mm)
6.00 in. x 6.00 in.
(152 mm x 152 mm)
8.00 in. x 8.00 in.
(203 mm x 203 mm)
12.00 in. x 6.00 in.
(305 mm x 152 mm)
4.25 in.
(108 mm)
4.25 in.
(108 mm)
.28 in.
(7 mm)
.28 in.
(7 mm)
.28 in.
(7 mm)
4.12 in.
(105 mm)
Flange